It is a well known archaeological concern that the remains of human bones left from the bronze age and early iron age Scandinavia are not nearly enough to represent the estimated population of the time. Furthermore the bones of each find rarely represent a whole individual. The majority of the bones must have been disposed of somewhere else, possibly scattered in running waters or in the fields, where they have evaporated or are securely hidden from archaeological excavations.This thesis deals with the grave concept and the problem in using a word that is so very clouded by its modern, western meaning. It also offers an alternative explanation to why the bones are handled the way they are and why they are found in such awkward contexts..

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Companies financed through borrowed capital are allowed a tax deduction for the costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

Future climate changes may lead to an interest of alternative and foreign forest tree species in order to spread the risks in forestry. Douglas fir, Sitka spruce, Freemont cottonwood and hybrid aspen are examples of popular foreign tree species that along with western red cedar could have a future in the Swedish forests.Södra Skogsägarna and SLU have collaboration in establishment of foreign species in Swedish forests.The purpose of this study was to analyze and present the establishment of western red cedar, and to survey and illustrate injuries of freeze drying and other damages like deer browsing, vegetation and insect attacks. The study included four different provenances, and spruce as a reference, planted in two locations ? Asa and Släne.Western red cedar is despite its name a conifer of the cupressaceae family with defined secondary characteristic and gets along well with an overstory. Western red cedar grows often in mixed stands with similar conifers and its natural habitat is within and in the area near to British Columbia.The study included two series of field inventories, one made in the summer and one in the autumn 2013, three growing seasons after plantation.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

It is a well known archaeological concern that the remains of human bones left from the bronze age and early iron age Scandinavia are not nearly enough to represent the estimated population of the time. Furthermore the bones of each find rarely represent a whole individual. The majority of the bones must have been disposed of somewhere else, possibly scattered in running waters or in the fields, where they have evaporated or are securely hidden from archaeological excavations.This thesis deals with the grave concept and the problem in using a word that is so very clouded by its modern, western meaning. It also offers an alternative explanation to why the bones are handled the way they are and why they are found in such awkward contexts..

It is a well known archaeological concern that the remains of human bones left from the bronze age and early iron age Scandinavia are not nearly enough to represent the estimated population of the time. Furthermore the bones of each find rarely represent a whole individual. The majority of the bones must have been disposed of somewhere else, possibly scattered in running waters or in the fields, where they have evaporated or are securely hidden from archaeological excavations.This thesis deals with the grave concept and the problem in using a word that is so very clouded by its modern, western meaning. It also offers an alternative explanation to why the bones are handled the way they are and why they are found in such awkward contexts..

Handling of animals during anaesthesia is an important field in the profession as a veterinary nurse and in which intubation is an essential part. Hence, adequate knowledge is necessary for the welfare of the animal. The objective of this literature study was to make it useful and trustworthy for veterinary nurses. It is intended to describe and summarize existing scientificity with its benefits and disadvantages within the different areas of intubation techniques and alternative methods of inhalation anaesthetic supplementation for general anaesthesia in rabbits. Endotracheal intubation in rabbits can be complicated and technically demanding due to the anatomy of the oropharynx including the narrowness of this structure, a relatively large tongue, large incisors and a limited mobility of the temperomandibular joint. The obstructed visualization of larynx and the rabbit?s tendency to develop laryngospasm contributes to the difficulty of intubation. Rabbits are susceptible to tracheal injury and multiple intubation attempts can cause tracheal lesions due to repeated damage to the tracheal mucous membrane, although damage can occur after a single intubation attempt as well. An ETT (endotracheal tube) with or without a cuff can be used during orotracheal intubation in rabbits.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

Swedish authorities have been dealt a mission by the Swedish state, where each agency works on the basis of their assignment. Communication has become more and more important for authorities, there are several reasons for the use of communication and they may differ from authority to authority. Some authorities claim that the purpose of the communication work is to create awareness and recognition among citizens. A communication form that has become increasingly important for government agencies is social media, according to the government authorities should implement social media in their communication work because it is very important that the authorities are available where the citizens are. Previous research has focused on the risks and opportunities that the social media generates for the public sector.

Along with the rapid expansion of wind power in Sweden during the last decades the competition about favorable areas has hardened. This among other reasons has caused the projectors to look into development of wind power in forests. There are several aspects regarding fatigue loads on the constructions that are severe in complex terrain, among which turbulence is one. The levels of turbulence which are accepted in order for the turbines to face a life length exceeding 20 years are regulated by the International Electrotechnical Commission, (IEC). In order to keep the turbulence below these levels there are three major steering tools to use: The ambient turbulence decreases with height and can therefore be regulated by the hub height of the turbines.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.