This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

There are several typical ideas about the suburb. The suburb is often associated with criminality and other social problems such as segregation. The purpose of this essay is to study the picture of how the suburb is constructed in a media context. The method used to answer the purpose of this study is critical discourse analysis, based on the thoughts of Norman Fairclough. The central theoretical ideas for this study are representation, stereotypes and racialization.

When searching for better and more practical interfaces between users and their computers, additional or alternative modes of communication between the two parties would be of great use. This thesis handles the possibilities of using eye and head movements as well as voice input as these alternative modes of communication. One part of this project is devoted to find possible interaction techniques when navigating in a computer interface with movements of the eye or the head. The result of this part is four different controls of an interface, adapted to suit this kind of navigation, combined together in a demo application. Another part of the project is devoted to the development of an application, with voice control as primary input method.

This essay will focus on the people using and are involved in, and have a large interest in the horror film genre. The purpose of this essay is to find what urge these people to continuously watch horror movies and how they believe to be acknowledge by the society in a modern sense. Our study is mainly based on two separate interviews and therefore, mainly from the users perspective. This essay is also complemented by earlier research on this topic. In context of stigma, violence debate, exclusion we found that the users truly can be found in a rare type of alternative sphere, besides the public sphere.

This paper describes the Swedish reconnaissance squads in the engineer battalions, their equipment, tasks and organization. An analysis is made to compare the present weapons and fire power of the reconnaissance squad with an extended weapon alternative. The analysis focuses on the abilities effect, protection and movement in different situations typical of a reconnaissance squad.The facts that are presented in this paper are mostly founded on the new field manual FältarbR Dyktjänst 2007, which regulates much of the reconnaissance activities. The aim of this paper is the making of a contribution in the developing progress of the new field manual and the reconnaissance squads in Swedish engineer battalions.The result of the analysis shows that the extended weapon alternative would be an asset..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The purpose of the study was to examine if parents' way ofcommunicating with their children changed after participation in ComAlongcommunicationcourse, and if changes remained over time. The studyinvolved 39 parents of 25 children with communicative disabilities. 33 of theparents had participated in ComAlong, the other six had not participated, buthad a partner who had participated in the course. Video recorded parentchildinteraction was analyzed and coded with the instrumentKOMMUNIKATIV. Results showed that parents used a significantly moreresponsive communication style and used significantly more augmentativeand alternative communication after ComAlong.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 15 hp, 2015.

This thesis deals with the ethical attitudes of professionals working with Methadone or Subutex assisted rehabilitation, concerning the constructed guidelines and directions from the Swedish National Board of Health and Welfare. The central themes in the thesis are: 1. What do professionals think of the rules concerning admissions to the rehabilitation programme? 2. What do professionals think of the rules/criteria for being excluded from the programme? 3.

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Forest as an investment alternative has become more and more popular over the last few years. Between the years 2004 and 2007 increased the price level on forest land with 70 percent in Jämtland. In this thesis a comparison has been conducted between forest in Jämtland and an investment in the stock market. The risk in the two investment alternatives has been included in the comparison. The thesis includes two different studies between the two alternatives.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.