The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

A large part of Sweden?s green, urban landscape is covered by lawns. Approximately 80 000 ha of maintained grass lawns are part of public courtyards, schoolyards, parks, golf courses, sport fields and traffic environments. Beyond this figure, the lawn is also an essential element in most private villa-gardens. Lawns have become a universal phenomenon through the dispersion of landscape aesthetics from the Western world.

Since the early 1940s in Sweden, subsidies have been a recurring feature in housing politics.Throughout history, these have been used as a management measure to control theconstruction of housing and to promote the Swedish welfare state. The political parties aretoday disagreeing on how much responsibility the state should carry for citizens housing. Tosolve the conflict, the dwelling has to be defined. Is the dwelling to be considered a socialright, like education and healthcare or is the dwelling to be considered a product for the freemarket, driven by supply and demand?The positive population growth in Stockholm has lead to an increased demand for dwellings.The supply of dwellings has not been growing at the same rate, which has implied higherhousing prices and longer wait for rented apartments.

This master thesis has been a pilot study preceding a forthcoming project of a larger scale with the long term objective to separate the direct effect of added nitrogen on soil processes from indirect effects via trees. The aim of this study has been to investigate the allocation of nitrogen following direct injection of liquid solutions into the xylem of 40 year old Norway spruce. The field site is located at Flakaliden (64°07?N, 19°27?E), approximately 60 km northwest of Umeå, Sweden. A total of 18 trees were selected for treatment, equally divided between three treatments, potassium nitrate, glutamine and water (control).

This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..

Every business is subject to service failures. The process of correcting these failures and turning disappointed customers back into happy ones is called service recovery. This is particularly important in the hotel business, where there are many moments of truth where customers may become dissatisfied. To further complicate things, service recovery is a process where you may have to correct errors of others - people beyond your control. The research field is relatively new and there are no turn-key solutions as to how to systematically work with service recovery.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

Uppsatsen behandlar Internetkonsultbranschens utgallringsfas där företagen kämpar för sin överlevnad. Studien ser närmare på företaget Tromb Internet Solutions och fokuserar framförallt på dess interna och externa relationer. Uppsatsen tar sin utgångspunkt i Public Relationsteorin. Med hjälp av PR för att skapa kommunikation internt inom företaget, till partners och även till övriga intressenter. Vi finner att PR är en teori som är högst aktuell för, och applicerbar på, en Internetkonsult i dagsläget.

This thesis presents the design and implementation of an accounting and status notification system for the LPRng print spooler. A solution using SNMP to query for needed accounting and status data is presented, a design built upon this, and an implementation produced. As the system derives from the requirements specification, it will make no attempt to solve all printer accounting problems or to offer compatibility with all printers, database management systems or print spoolers. However, several solutions for printer accounting are discussed and the best solution derived from the requirements specification will be chosen..

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

In this bachelor thesis we have studied how interaction designers describe their profession. The research material is based on nine interviews with interaction designers. Questions cover areas such as interaction design tasks, what abilities they consider important, how they describe their relationship to the users, and cooperation with colleagues. We have analyzed the results using key terms such as habitus, field, and capital, as described by sociologist Pierre Bourdieu. The interviewees express humanistic views, and ask for more cooperation between interaction designers, as well as other people within the field of IT production.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

AbstractPurpose/Aim: The aim of this paper is to find out how the company Japanporten can improve their communication through their website. I want to find possible weaknesses in the communication style, and suggest solutions to those. All for the purpose of managing to create understanding and interest to fulfil the purpose and goal for the communication.Material/Method: I have used a qualitative research method, where I have interviewed the manager of Japanporten and made an contents analysis of their website.Main results: Japanporten supplies good functions on their website. The have a clear purpose and explain who they are and what the can do for the visitor. The main weakness is the argumentation to create and keep an interest from the visitor.