This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis aims to identify the building integrated photovoltaic solutions available in the market with respect to general pros and cons of different systems and a technical description of there attachment system. Investigate and provide examples of various building integrated photovoltaic solutions in Sweden and describe the experiences and results of these projects.The methods used to obtain relevant information are interviews with individuals involved in significant projects and a thorough search of different solutions from solar suppliers.The conclusion is that solar energy is needed for a sustainable society. There are endless opportunities regarding BIPV, with many companies with different products and individual solutions. But so far it?s not so customary in Sweden.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The thesis demonstrates protection solutions that can be suitable for a camp during internationalmissions in order to resist complex threats. The threats could consist of small arms, machineguns,RPG 7, anti armour missiles, mortar, artillery, HPM-weapons, car bombs, biological and chemicalweapons as well as sabotage and theft. It?s not the technology itself that makes the threat scenariocomplex it?s the way the opponent acts during the operations. The opponent acts usually incivilian clothes and therefore he is difficult to distinguish from other civilians.

This study's main objective was to identify adolescents participation in alternative sport activities and which kind of physical activity that was preferred by adolescents who didn't had any earlier experience of sport clubs. The study combined interviews and surveys with the purpose to get both adolescents and sport leaders perspective. A total of five interviews were performed and fifty-four surveys was collected. The results showed that adolescents already physical active were those who participated in alternative sport activities. Who participate in alternative sport activities can depend on habitus, comprehended capital forms and in which social field the sport activities exists..

The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

Sponsoring is today a more common form for corporation in the trade of culture. This has led to a situation, in which companies and institutions of culture, must be more versed in sponsorship. In this essay, we aim at understand and give an account for how the corporation, in a sponsorship relationship might work.A sponsorship relationship also means that a lot of knowledge is needed in other doctrines. The law aspect is one of these, which we also will concern in this essay, another aspect is the integrity of the culture.The main purpose with this essay is to find information, which might work recommendingly, for organizations that works with sponsorship. Mainly we will considerate sponsorship as a source for the financing of culture.In this essay we have discovered that sponsoring has become increasingly important for financing cultural activities, and a good corporation demands a great deal of commitment from both parties.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

This study's main objective was to identify adolescents participation in alternative sport activities and which kind of physical activity that was preferred by adolescents who didn't had any earlier experience of sport clubs. The study combined interviews and surveys with the purpose to get both adolescents and sport leaders perspective. A total of five interviews were performed and fifty-four surveys was collected. The results showed that adolescents already physical active were those who participated in alternative sport activities. Who participate in alternative sport activities can depend on habitus, comprehended capital forms and in which social field the sport activities exists..

This study's main objective was to identify adolescents participation in alternative sport activities and which kind of physical activity that was preferred by adolescents who didn't had any earlier experience of sport clubs. The study combined interviews and surveys with the purpose to get both adolescents and sport leaders perspective. A total of five interviews were performed and fifty-four surveys was collected. The results showed that adolescents already physical active were those who participated in alternative sport activities. Who participate in alternative sport activities can depend on habitus, comprehended capital forms and in which social field the sport activities exists..

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

This study's main objective was to identify adolescents participation in alternative sport activities and which kind of physical activity that was preferred by adolescents who didn't had any earlier experience of sport clubs. The study combined interviews and surveys with the purpose to get both adolescents and sport leaders perspective. A total of five interviews were performed and fifty-four surveys was collected. The results showed that adolescents already physical active were those who participated in alternative sport activities. Who participate in alternative sport activities can depend on habitus, comprehended capital forms and in which social field the sport activities exists..