The increased interest in a sustainable environment puts pressure on companies in the manufacturing industry. Rexcell Tissue & Airlaid AB (Rexcell) in Skåpafors produces paper to be converted into tabletop and hygiene products. Rexcell is certified according to the environmental management system ISO 14001, gaining competitive advantages by showing that the company works toward a sustainable environment and that they follow current legislation. The activities at the company are classified as hazardous to the environment according to the Environmental code. Every year, the activities are inspected by an independent inspector.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

The interest for power and energy measurement has greatly raised with todays increasing electricity prices and enviromental awareness. In the search for energy efficient solutions, the measurements are more complex due to increasing of non linear components. Harmonics and non sinusoidal voltages put high demands on sampling and filtering. Meanwhile, the price must be controlled so the customer still will find it interesting to invest in smaller plants. ITT W&WW asks for a robust, heat resistant power meter with compact dimensions to allow mounting inside the casing of a pump.

Various electromagnetic (EM) treatments has been investigated for their potential in improving crop productivity over the past century. There is today an increasing amount of scientists advocating EM treatments as an organically compatible method for improving plant growth and yield. However, failure to produce repeatable effects and defining causal mechanisms has made it a study of much controversy and debate. The subject requires indepth interdisciplinary knowledge, making it inaccessible for the majority of biologists, horticulturists and growers. In this combined literature review and pilot study, these issues are addressed by providing a comprehensive introductory review of the topic plant bioelectromagnetics and its potential horticultural usability.

In order to continue to be competitive in the current industrial climate, producers must increase efficiency at their plants. Several Swedish companies choose to utilise the principles of Lean production. Tour & Andersson AB (TA) has elected to create their own model using Toyota?s productions system which has been named TAPS (Tour & Andersson Production System). Following two years of working with TAPS the company has decided to introduce Total Productive Maintenance (TPM). Most of the work carried out in the maintenance department today is in form of repairs to already faulty equipment.

Safety and risk management currently have a starting point based on the negative outcome of safety, thus the lack of safety. The starting point for the thesis is to find a way to measure the positive outcome of safety through ergonomic aspects regarding chemical plants that are covered of the Seveso II Directive.Through a literature study of safety and ergonomics fourteen key aspects of safety were found. Safety Performance Indicators (SPI's) are used to assess the fourteen identified proactive indicators of safety. An analysis in three steps - called risk status assessment - is design to give an SPI its value. A pilot study of the risk status assessment was performed at the ethanol producer Lantmännen Agroetanol in Norrköping, Sweden..

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

Den här studien berör några av de miljöpsykologiska grunderna i Alnarps Rehabiliteringsträdgårds uppbyggnad. Den ger förslag på hur karaktären rofylld kan förstärkas och hur säsongen kan förlängas i den restorativa delen av välkomstträdgården med växter som tilltalar flera av våra sinnen. Deltagarna som kommer till trädgården har i regel stressrelaterade åkommor såsom utmattningssyndrom och har varit sjukskrivna en längre tid. De är ofta mycket känsliga på grund av fysisk och psykisk utmattning. Studier visar att deltagarna har behov av en kravlös miljö där de kan få vara ostörda.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

The report aims to show how outdoor environments have been shaped with the purpose of experiencing them from the inside of buildings, through an overview perspective. Two Danish gardens are used as examples. One is the Baroque garden in the garden of Frederiksborg castle in Hillerød. The Baroque garden is thus a part of a larger garden. The second garden is the Charlotte Garden, a relatively newly constructed garden within a housing complex in Østerbro in Copenhagen. Both gardens are analyzed on the basis of visual expression and structure. In the report, it is also discussed how the contemporary society have evoked the different ways of shaping the gardens.