This report describes the construction and development of a control box, which is a tool for testing and verifying a certain model of Rapid?s built in staplers (model A6102). Basically the function of the control box is to interpret any errors that may occur in the stapler and to make it possible to test fire the stapler.The control box should be able to communicate with the stapler using a specialized communication protocol. The different data such as errors, firmware etc. from the stapler is presented in plain language on a display.

AimThe specific questions in the theoretic part were:What is contained in the terms "balance and balance skill" and how can this skill be measured?The specific questions in the empirical part were:How does balance skill in different age categories of children correlate with biological and physiological parameters such as age, gender, body height, weight and level of physical activity?MethodsLiterature search based on books and scientific papers related to the questions posed above. Selection was made at libraries and on?line through "Pubmed". Specific search words were used.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this study is to investigate the effect of using more promotion material to enhance the in-store communication of sales promotion. In the retail industry today the research regarding the benefits from using various in-store promotion materials is limited, thus this study was carried out to bring clarity to this subject. The study is carried out in two pharmacies and the design of the study was to add more promotion materials to one store, while keeping the other store in its normal condition and then let the stores change conditions after one week e.g. latin-square design. The data collection of this study consists of four different methods: sales data, a questionnaire with 182 customers, an observation study of 300 consumers and an eye-tracking experiment with 41 participants.

AimThe specific questions in the theoretic part were:What is contained in the terms "balance and balance skill" and how can this skill be measured?The specific questions in the empirical part were:How does balance skill in different age categories of children correlate with biological and physiological parameters such as age, gender, body height, weight and level of physical activity?MethodsLiterature search based on books and scientific papers related to the questions posed above. Selection was made at libraries and on?line through "Pubmed". Specific search words were used.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this thesis is to investigate whether placement, using a special display, of ecological products, will have an effect on consumer buying behaviour and thereby sales of these products. When talking about sales we refer to the amount of ecological products that are being bought, habitual and unplanned, as a response due to the placement of the products in-store. To further elucidate the purpose, the thesis will focus on if the placement of the products itself will have an impact on the customers? attitude towards buying ecological products. A deductive approach was applied where we did a quantitative study using triangulation to receive data to reveal if the placement of ecological products had any effect on the sales of these products.

This research paper is a thesaurus construction for the interdisciplinary subject of landscape planning. The personnel doing the indexing of documents at the Swedish University of Agricultural Sciences had earlier expressed a need for such a work within the fields of Landscape Architecture and Landscape Engineering. However our objective was not to create a complete thesaurus, but instead a basic construction which the personnel at the Agricultural University could expand upon. The actual construction is based upon ISO 2788-1986, Documentation Ð Guidelines for the establishment and development of monolingual thesauri, and Aitchison, Gilchrist and BawdenÕs Thesaurus Construction (1997). The line of enquiry taken has dealt with the problems relating to the collection, selection and control of indexing terms.

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

I meet in my work as art teacher many students of different descent, were they, or their parents, have different school experience than the Swedish. This, in combination with therecent discussion after the Muhammad caricatures about the banning of images in Islamic religion, made me curious to study what art education in a Muslim country looked like. I went to visit the Maramra Egitim Köyü school in Istanbul, Turkey, and especially their art classesfrom grade five to eight, which are the same age of students that I have been working with thelast ten years. This was my first visit to Turkey.The question I ask is: What does the practice of Turkish art education look like, using the Marmara school as an example. Which discourses can I identify in the art teacher practice? What surprised me the most was the frequent visual exposure of the founder of the Turkishstate, Kemal Atatürk.

Spotify is a music service that offers on-demand streaming and is available in several countries worldwide. As the company and the interest for it grows, more and more parties are involved and those involved, including the record labels want to control and get an overview of their products. They want to be able to see, for example, when a product is available on Spotify and in which countries.Spotify is in May 2013 in process of developing a to be used by administrators on Spotify in order to meet the record labels with the information requested. The new software intends being used by administrators but also by the record labels so that they will be able to overview their products availability.We were asked by one of the developers to conduct user interviews and tests to result in a design proposal on how the display page of information about a product could be visualized more clearly so that it suits both record labels and employees at Spotify. The results of our contextual interviews were translated into a prototype with two display pages.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

I meet in my work as art teacher many students of different descent, were they, or their parents, have different school experience than the Swedish. This, in combination with therecent discussion after the Muhammad caricatures about the banning of images in Islamic religion, made me curious to study what art education in a Muslim country looked like. I went to visit the Maramra Egitim Köyü school in Istanbul, Turkey, and especially their art classesfrom grade five to eight, which are the same age of students that I have been working with thelast ten years. This was my first visit to Turkey.The question I ask is: What does the practice of Turkish art education look like, using the Marmara school as an example. Which discourses can I identify in the art teacher practice? What surprised me the most was the frequent visual exposure of the founder of the Turkishstate, Kemal Atatürk.

This bachelor thesis in tourism studies focuses on people's use of social media related to travel. The paper aims to provide a wider knowledge of tourist?s propensity to display destinations through social media and how they perceive others that display travelling. This is put in relation to the term of social status in order to find out if there is a possible link. The intention was to provide an insight into the phenomenon to contribute new awareness that destinations can exploit in their marketing.