Purpose: The purpose is to examine more closely why the achievement of the environmental goals is so low. To within the thesis work to make this as interesting and with as good quality as possible, especially the environmental quality goal Reduced climate impact, but also Natural acidification and Protective ozone layer, has been chosen to be studied further. Method: A qualitative method and text analysis has been applied. Intervention theory, as Vedung 2009 describes, is used as an intellectual backbone and as a help to structure the essay. The three environmental quality goals correspond cases, or units of analysis. Analysis: The fulfillment of the respective environmental quality goals is analyzed according to its goal, policy instruments, implementation and its effects. To this some of the problems are analyzed that exist on the path to achieve the goals.

AimThe aim of this study was to, through a systematic literature review of evidence based electromyographic (EMG) studies, identify specific exercises for rehabilitation of the Serratus Anterior muscle. The research questions were: ?Which exercises can be recommended to use to activate the Serratus Anterior?? and ?Are the recommended exercises altered between studies on individuals with and without shoulder dysfunction??. MethodThe method was a systematic literature review. First the study aim and research questions were formulated. A research protocol was then formulated with inclusion and exclusion criteria and search terms.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

This thesis examines how marketing by secondhand apps affects young adult women's consumption habits, investigating whether these platforms promote or counteract overconsumption. While the secondhand market is considered more sustainable than buying new, these apps may still encourage overconsumption. The study focuses on the marketing strategies of three major secondhand apps in Sweden: Tradera, Sellpy, and Vinted, analyzing their impact on consumer behavior using the AIDA model (Attention, Interest, Desire, Action). Based on qualitative interviews with eleven women aged 20-27 and the authors observations of the apps marketing activities, the study finds that secondhand apps often emphasize environmental benefits and makes secondhand shopping accessible and appealing. However, the marketing tactics used by these apps, including frequent push notifications, targeted advertisements, and influencer collaborations, may lead to increased consumption. Overconsumption causes significant environmental damage, and while the secondhand market can mitigate these effects by extending the lifecycle of items, the emphasis on convenience end environmental benefits can inadvertently encourage more consumption. The study concludes that secondhand apps play a complex role in consumer behavior, balancing the potential for sustainability with the risk of promoting overconsumption.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

Crossfit is a recently developed form of training which is based on a number of functional resistance exercises performed at high intensity, often to the point of muscular failure. Crossfit has since its introduction 30 years ago, reached vast popularity all around the world, including Sweden. Its practitioners considers Crossfit to be an effective training method for achieving a functional and total trained physique thru improvements in VO2max, muscle strength, endurance, balance and speed. Few scientific studies has been published in the subject which is why this study sets out to examine the effect of Crossfit on VO2max (measured with Åstrands submaximal cyclingtest), maximal strength capacity in lower- and upper body muscles (measured with 1 RM tests in bench press and leg press), rapid strength capacity and strength endurance capacity in upper body muscles (measured with push-up test in 30 seconds) and explosive strength capacity in lower body muscles (measured with sergeant jump test). Five women with an average of 33(±5) years of age all new to Crossfit, performed these tests at two separate occasions with a training period of four weeks consisting of 12(±3,67) Crossfit sessions in between.The result showed a significant improvement in the maximal strength capacity of the leg extension muscles (p=0,025).

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

The web is a constantly growing medium that presumably plays an increasing role in public library reference services. In order to provide high quality reference service the librarians need to be able to master this medium. Therefore it is interesting to get an understanding of how librarians actually use the web. The aim of this Master s thesis is to investigate what web search tools are used by public librarians in reference service. Furthermore, the aim is to get an understanding of how the librarians think about those tools and what background factors influence their selection of tools.

Sara Stridsberg?s novels Happy Sally, Drömfakulteten and Darling River are all brimming withliterary images of movement and becoming. The physical aspects of being a female subject inbecoming highlights the enfleshed body as important. Themes such as sexuality, power andviolence can be traced in the beautiful but most disturbing narratives of Stridsberg.The purpose of this study is to show the reader how the literary female characters aretranscending the physical borders of their bodies in order to become something more than what thehuman form allows them to be. Heteronormative sexuality, sickness, closeness to water andanimaling are bound together by the way they enact the female characters to stretch beyond thesurfaces of their skins.

This essay examines the olfactory reading as a possible way to make sense of a fragmented novel, in this case Sara Stridsberg?s debut Happy Sally (2004). Through close reading, the essay identifies the source of the smells, who perceives it, and how this is portrayed in the text. The smell?s position in the text is understood in relation to Maurice Merleau-Ponty?s phenomenology, where the body, as created in the literary text, is considered as a source of knowledge.

Social media on the Web has become more common over the last decade and in recent years it has grown immensely. The social media with the highest amount of members is Facebook, where not only private persons are found - companies started to establish their profiles on the network in 2006. However, little is known about how these companies succeed and reach their audience with information dissemination and interact with them. The aim of this study is to contribute with information to local companies on how they can manage to maintain their activity with different approaches and strategies. This study examines how three different local companies chooses to spread information and maintain relationships with their members on Facebook.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

The Anglo-Saxon trust is not a new phenomenon, but existed as early as in the Middle Ages. The concept is customary among common-law countries, such as England the US,but unfamiliar to civil-law countries like Sweden. The person who creates the trust is called a settlor, the one who holds and administer the property is a trustee and the person who benefits from the settlement is called a beneficiary.In Sweden there is no legislation of how the trust ought to be assessed, but the need to understand it has probably increased with the internationalization.The Swedish Supreme Administrative Court has had a few opportunities to elucidate some of the uncertainties regarding trusts, but chose to abstain. With this The Swedish Tax Panel has very limited guidance from the court when they receive an application of an advance notice.A trust is not a legal entity nor a tax subject. This differs the trust from a foundation and they can not be placed on an equality from a Swedish tax perspective.In an advance notice, 2010-03-23 (dnr 103-09/D) om Inkomstskatt: Inkomst av tjänst ? värdepappersförmån, the Swedish Tax Panel equalizes the trust property with shares when determining how to tax the assets.

Volvo Aeros flygmotortillverkning i Trollhättan har infört ett antal nya detaljvarianter i produktionen. Detta har medfört att den robotcell som är avsedd att utföra en avgradningsoperation är i behov av uppdatering av både hårdvara och mjukvara. Denna rapport följer framtagningen av fixturkoncept som möjliggör att robotcellen kan användas även till de nya detaljerna. De förslag som arbetats fram sträcker sig från enklast möjliga till mer avancerade och nytänkande funktioner. Samtliga funktioner och koncept har genomgått gallringar i ett flertal steg.