As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

There are about 3 500 churches protected under the Heritage Conservation Act in Sweden today. These churches still belong to living congregations that want to be able to adapt them to the needs of today, just like people have done throughout history. But since the churches are protected, the congregations have to apply for a permit and that is not always given. This can lead to frustration, and you can sometimes hear representatives of the church express the view that antiquarian authorities are enemies that oppose the church. On the other hand we have the antiquarian authorities that, in a way, have to act as advocates for generations to come and make sure that there is a cultural heritage preserved for them when they grow up.

This paper describes the work done trying to diminish the noise present in the signal from an IR-detector. The project was aiming towards two different kinds of applications; heat protection and presence detection. The hypothesis was that the signal-noise ratio would decrease if a filter and a proper installation were used for the detector. Some experiments were executed to determine what kind of filter were the most suitable for each application and how these could be installed. After executing the experiments and evaluate the results we recommend to use a specific filter for each application.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

The “peer to peer” (P2P) is a technology of downloading and filesharing between online - Internet - users by the mean of specified software. Since June 1999, the Napster software has made the happiness of millions of individuals who used it to obtain and share free audio files Mp3. Rapidly, the major recording companies have prosecuted the Napster Company and managed to force it to close down. They were arguing against it for it is supporting the development on a large scale traffic of files protected by copyright and thus was threatening the whole music and movies economic world. Since fast Internet connections multiplied, "peer to peer" software and networks improved, so that this mode of exchange became an unprecedented success. Today all cultural products, in particular films and music, are concerned with this free –of– charge distribution without any financial counterpart for the copyright holders. Two tools hold today the top ranks and concentrate large traffic: eDonkey and eMule.

The purpose of this thesis was to examine if there where fallacies in the design solutions for the business system IFS Applications from a user perspective, and if so, correct these from a cognitive science approach.Data collection consisted of three main portions. These where; workshop, individual interviews and observations. The collected data was analyzed and resulted in identification of two main areas in the application that where found lacking.The result of the study showed that the usability for processing large amounts of data and the lack of customization where the main flaws in the application. Two low fidelity prototypes where created with the purpose of rectifying the underlying flawed design solutions that where identified from the collected data..

Syftet med arbetet var att ta reda på om den ökade tidsåtgången som parprogrammeringen leder till uppvägs av de fördelar som den genererar i jämförelse med enskild programmering där arbetet delas mellan två programmerare och sedan integreras. I arbetet presenteras resultatet från en enkätundersökning som sju personer från fyra olika företag i Sverige har besvarat. Samtliga personer som besvarat enkäten har arbetat både med enskild programmering och parprogrammering. Vårt arbete bidrar till forskningsområdet programvaruteknik som intresserar sig för mjukvaruutvecklingsmetoder. På senare tid har detta forskningsområde också intresserat sig för lättrörlig mjukvaruutveckling där utvecklingsmetoden Extreme Programming (XP) ingår. XP tillämpar parprogrammering och är en mjukvaruteknisk metod som har att göra med klassisk mjukvaruteknik som bl.a.

Sedan de introducerades av Bruno Buchberger 1965 har Gröbnerbaser blivit ett standardverktyg inom beräkningsalgebra. Gröbnerbaser har ett brett spektrum av tillämpningar som sträcker sig från lösning av icke-linjära polynomekvationssystem till att vara ett beräkningsmässigt fundament för explicit presentation av diverse abstrakta algebraiska objekt. I denna rapport sammanfattar vi ett antal klassiska resultat om Gröbnerbaser tillsammans med exempel på moderna generaliseringar. Rapporten är avsedd att kunna användas som en första introduktion till ämnet och förutsätter formellt inga kunskaper utöver grundläggande linjär algebra. Vidare ges exempel på klassiska metoder för ekvationslösning och abstraktare användning av Gröbnerbaser..

IT exist and are needed in larger organisations today, this creates possibilities for new applications. It has become more frequent with IT within HRM which has developed new concepts like e-HRM and HRIS which links IT and HRM together. We have through qualitative content analysis of interviews investigated how IT-tools affect HR-workmanship. The purpose is to create a basis for describing how employees experience their work with HR within a PA-system. The basis of the PA-system will then answer if it contributes or limits the employees and their activities.

This project measures the upper bound of exposure time for laser reflection detection in the software DotDetector. Via measurement of the exposure time for which distortion happens in a room lit with everyday light we conclude that the upper bound for exposure times are 100 milliseconds. This value does not change as long as the lighting in the room is the same. As future work this project proposes variable upper bounds depending on secondary lighting in the room. Also we propose automating the colour masking of the detection algorithm..

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.