The main environmental problem for aviation is the great amount of exhaust gases, mainly nitrogen oxides, carbon monoxide, carbon dioxide and hydrocarbons - mostly "greenhouse gases" leading to climate changes. I decided to sort out what is being done to decrease these problems and what regulations there are concerning air pollution by the means of searching the internet and using publications from aviation authorities for current figures. I chose to scrutinize authorities on political, authority and company level, resulting in summarizing the work of UN and EU respectively, ICAO (International Civil Aviation Organization), JAA (Joint Aviation Authorities) and LFV (Swedish Civil Aviation Authority), and finally SAS, representing the airline companies. Conclusion that I have drawn are thatthere are regulations for air pollution, written down in ICAO's Annex 16, that are to be followed. Secondly, LFV are environmentally controlling their nineteen airports and since economy is an important reason for not giving priority to environmental issues in aviation emission charge and noise charge are added to the landing fees.

I denna uppsats undersöker vi ett antal grundförutsättningar som behövs för att uppnå en systemförvaltning som skall kunna stödja en organisations verksamhetsprocesser. Dessa grundförutsättningar som vi grupperat i föl- jande fem faktorer: affärsmässighet, organisation, styrning, förvaltning och processer har vi främst identifierat ur teorier kring systemförvaltning, pro- cessorientering och organisationslära. Undersökningen som genomförts på Luleå tekniska universitet har visat att alla dessa är viktiga för en fungeran-de systemförvaltning ur ett verksamhetsperspektiv..

Ethnic discrimination is still a problem in the Swedish employment market. The Ombudsman against Ethnic Discrimination received 154 complaints relating to discrimination due to ethnicity in the working life in 2012. In addition, reported unemployment rates in Sweden differ markedly between native-born and foreign-born. The purpose of this paper is to investigate how protection against ethnic discrimination in recruitment looks like in Sweden and describe different methods an employer may use to prevent that ethnic discrimination occurs in recruitment situations. The first and second issue of the essay concern what protection there is in Sweden against ethnic discrimination in recruitment situations, based on international and national law. The traditional legal dogmatic method, which describes the valid law, is used in these sections.

This thesis is about adware, which is very popular today. The adwares are used to, among other things, down- and upload files from other users on the Internet. One thing that most users of such programs are not aware of is that many of the adwares contain spyware. These spywares install themselves simultaneously with the adwares. Two of the spyware features is to generate pop-ups in the web browser and to direct advertisment from the users web habits.

The visual complexity in real-time applications, like computer games, is increasing with customer demands on vissual apperance. This trend is supported by even better graphics cards from the hardvare industry. This must be taken into consideration when the architecture of a new graphics engine is to be designed. The engines renderer is responsible of generating a picture of scene data. The renderer must cope with increasingly more complex scenes, and must be able to render them depending on available hardvare capasity.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.

Quickmatch is a company that recruits students to other companies that need temporary workers. Today all administration is done by hand, which is very time demanding and therefore inefficient. Employees send assignment reports by e-mail about the working hours and breaks to the administration office. Since these reports are handled manually, there is a great need for an automated system that makes the company more scalable.The purpose of this work was to solve the defined problem, i. e.

This thesis was conducted to assess how the privatization of Iran Air process managed in last efforts and how should it be in right way. It increases the knowledge about privatization in Iran and the need for it. Iran air as our case study is a flag-carrier airline company that is protected by government regulations and subsidies. We try to find the reasons for failure of privatization in Iran Air and their attempt on privatization.The method used to collect data was a qualitative methodology, consisting of semi-structured interviews with relevant managers, and knowledgeable professors and the official sites and press. In conclusion, we find that privatization is an important need for Iran Air Company and the main problems that are against Iran Air can be categorized to political, financial, and social.

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

This is a thesis written for a master's degree at the Computer Vision Laboratory, University of Linköping. An abstract outer product is defined and used as a bridge to reach 2:nd and 4:th order tensors. Some applications of these in geometric analysis of range data are discussed and illustrated. In idealized setups, simple geometric objects, like spheres or polygons, are successfully detected. Finally, the generalization to n:th order tensors for storing and analysing geometric information is discussed..

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

Målet med denna studie är att utveckla en adapterprototyp mot en öppen energiplattform och dokumentera utvecklingsprocessen. Fokus ligger på att integrera Philips Hue, ett system för styra trådlösa lampor mot plattformen Elis (Mobile services for energy e ciency in existing buildings). Inom en begränsad tidsram så ska vi sätta oss in i två främmande system till en sådan grad att vi kan skapa kommunikationen mellan dem. Inledningsvis krävs det att vi läser dokumentation och att vi jobbar fram en arbetsplan. Vidare kommer vi lösa den adaption som krävs för att värden mellan det två systemen överensstämmer och fungerar.

This report discusses the development of an autonomous system that can travel a distance of atleast 30 meters on two wheels. The system, the robot, detects black lines and stops if one isdetected. A remote control can be used to start and stop the robot. The robot is constructed ofmainly steel with smaller, more detailed, parts in plastic. A significant amout of time has beenused to enable the robot to balance on its own.