In this thesis, the conditions of using the maintenance method live work at the Swedish TSO, Svenska Kraftnät has been analyzed. The study is limited to only include live work on 220 and 400 kV. The live work method is a type of maintenance that can be done, on lines or stations, even though they are still energized. The purpose of this thesis has been to map the present live work situation at these levels in Sweden. The study is based mostly on interviews with people who have specific field competence with in live work but also with personnel at Svenska Kraftnät.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design22,5 hp, 2014.

Executive summaryThe aim of this study is to examine how the favourability and brand exposure of Norwegian has been damage by their supplier, Boeing 787:s, problems concerning the aircraft Dreamliner. The theoretical framework underlies the content analysis that has been used to operate the study. In total the empirical data rise up to 623 articles that has been collected and analysed from the media archive Retriever. Compares to before and after Boeing 787:s problem with the Dreamliner, the results indicates that the favourability of Norwegian in the Swedish media landscape during the problems was negatively affected. The results also show that there was no increase in brand exposure for Norwergian during the problems.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

This paper thoroughly investigates needs and requirements for overhead distribution feeder inspection and develops models to investigate possible relations between short term inspections remarks and outages. The study was conducted in collaboration with Fortum Distribution AB that supplied extensive information about their overhead power feeders concerning both inspection and power outages. The investigated models where lognormal linear model, Poisson generalized linear model and negative binomial generalized linear model. All models were implemented utilizing offset terms to compensate for differences in feeder length and amount of overhead versus underground feeders. The Poisson generalized linear model was rejected at an early stage due to overdispersion and neither of the remaining models fit the data perfectly.

In forestry there are always needs of forest data to make good strategic decisions of different actions and economic winning. Usually this data gets from field-estimations made by forest workers with expensive costs and sometimes unsatisfied quality. StoraEnso Skog is a great forest company in Sweden and they have part of the responsibility of the forest own by Bergvik Skog. Bergvik Skog is owner of 1, 9 million hectares productive forest land. Both Bergvik and StoraEnso have great interest in new inventory techniques to get the important forest data. The company Foran Remote Sensing offers the opportunity with airborne laserscanning of forest and forest land. Foran got the mission of Bergvik and StoraEnso to laser scan Bergviks possession in Älvdalen, Dalarna.

The purpose of this study is to examine what motivates people to help others at risk to themselves. The focus is on international aid workers, which in their work put themselves in situations of risk. Earlier research shows that international aid work involves risks such as infectious diseases, violence, death threats, assaults, constant insecurity and risk to be traumatized etc. There is not much research done on what motivates to help others in spite of risks, hence we find this an interesting area. We have interviewed six respondents about the content and character of their motivation and factors that are important for the maintenance and development of this motivation.

Företaget som studien utförts på upplever ett problem vid hanteringen av underhållsarbete i fabriken. Processerna för felrapportering och beställning av reservdelar är tidskrävande och involverar arbete från flera olika parter. Merparten av allt underhållsarbete som utförs är av oplanerat slag och ett fungerande uppföljningsarbete för att komma till rätta med de pro-duktionsstörningar som äger rum i processen saknas.Syftet med examensarbetet har varit att skapa underlag för att förbättra företagets effektivitet genom att optimera underhållsarbetet med hjälp av förslag till ett underhållssystem och olika tillvägagångssätt för att effektivisera underhållsarbetet.Under arbetets gång har en underhållsloggbok utformats i Excel. Loggboken används till att logga alla underhållsarbeten som inträffar i produktionen. Dessa arbeten ligger till grund för merparten av de beräkningar som utförts under projektet.Beräkningarna syftade till att kartlägga var i processen flest fel inträffar och av vilken karaktär dessa fel är.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

The heating of companies premises is today functional with electrical heating and heating offossil fuel. The energy cost for these kinds of heating in buildings has heavily increased duringthe last years and the influence on the environment has become more visual. This leads to thatenterprises today become more anxious to render energy more effective and find alternativesolutions to their ancient heating systems. This is something that Skandinaviska kraftprodukterAB in Halmstad has become aware of.The purpose with this examination is to find the most cost-efficient and environmental measuresfor the office and workshop premises of SKP AB. Where one of the bigger things is to find agood alternative for their current oil furnace, which was heating the workshop.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.