The purpose of this paper is to examine how the target to convert the Swedish military aviation industry towards working within the civilian sector was planned and implemented parallel to the target of building a world-class military aircraft. A number of Government bills have been studied, bills directly connected to the JAS-project as well as bills dealing with civilian project ?s for the military aviation industry. The first group includes bills dealing with the JAS-project ?s role in the overarcing defence policy, as well as the Government ?s bill specifying the guidelines for the JAS-project.

Syftet med undersökningen är att kartlägga skaderiskerna med att arbeta som marin maskinpersonal och jämföra skaderisken med anställda som har liknande arbeten iland. Undersökningen inbegriper även att kartlägga vilka typer av arbetsskador, som ger de mest allvarliga konsekvenserna för den anställde i förhållande till hur vanlig olyckan är.Undersökningen är en litteraturstudie där Arbetsmiljöverkets arbetsskadeanmälningar utgör grundmaterialet, där totalt 198 arbetsskador behandlades och kategoriserades. Transportstyrelsens statistik för ombordanställda jämfördes med Arbetsmiljöverket och Statistiska centralbyrån statistik över anställda iland. Detta för att se vilken yrkeskategori som hade högst skaderisk.Resultatet av undersökningen visar att arbetsolyckor under kategorierna ?Bära? och ?Halka/Snubbla/Trilla? och arbetssjukdomar under kategorin ?Tunga lyft/Arbetsställningar? är de arbetsskador, som ger de mest allvarliga konsekvenserna i förhållande till hur vanlig arbetsskadan är.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

The purpose of this MSc thesis is to examine the retrieval effectiveness of two Web search engines with queries from the academic discipline of Classical Studies. The two search engines are chosen to represent two different types Google as a broad general search engine and Argos as a specialised search engine for the subject of Classical Studies. The search engines are compared for precision among the first twenty results returned for thirty queries. In order to avoid bias in the study, the queries are based on real users' information needs. Due to the subjective character of the concept of relevance, the study is performed with five different experiments with five different definitions of relevance.

Purpose/Aim: To find power structures within the blog network.Material/Method: Using keywords to find all available blog posts about the National Defence Radio Establishment from the blog search engine Twingly, and thereafter using the same blog search engine to find inlinks from other blogs, to those posts. The data is set into the context of the small-world networks models of Duncan J. Watts and rich-club models of Sergi Valverde och Ricard V. Sole.Main results: 5183 unique blogs have written about the subject in 22779 blog posts to which 28128 inlinks from other blogposts are made. Just over one fifth of the blogs are linkted to each other in one big network, where the remaining blogs stand without any ingoing or outgoing links.

iProspect is a global digital marketing agency and work primarily with search marketing. They were the first search engine marketing agency in the world when the company started up 1996 in Boston, Massachusetts, and the first in Sweden to offer services in search marketing after establishing themselves on the Swedish market the following year. iProspect can be found in the södermalm office in south central Stockholm. They are a comprehensive agency within search and offer everything from search engine optimization and sponsored links to advertising on social media. They?re goal is to lead developments in search marketing and to keep ahead of competition.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

AbstractMotor sports have been around as long as motor vehicles have been. Sports are often seen as costly polluter but in the same time the motor sports have encourages a large part of development, both for vehicles and other industries. Inventions like rear mirror and ABS brakes come from motor sports. One way to once again drive development forward while making motor sports carbon-neutral is to run the race cars on hydrogen. In this thesis, the goal is to convert a spark ignition engine for hydrogen operation.

The heuristic methods used by the anti-trojan application TrojanHunter have been evaluated. The evaluation shows that the heuristic scan engine of TrojanHunter has a very good detection ratio and that the detection ratio can be even further improved by implementing the suggested improvements, the most important of which is a white list to avoid misidentifying files that are known not to be trojans..

To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

Executive summaryThe aim of this study is to examine how the favourability and brand exposure of Norwegian has been damage by their supplier, Boeing 787:s, problems concerning the aircraft Dreamliner. The theoretical framework underlies the content analysis that has been used to operate the study. In total the empirical data rise up to 623 articles that has been collected and analysed from the media archive Retriever. Compares to before and after Boeing 787:s problem with the Dreamliner, the results indicates that the favourability of Norwegian in the Swedish media landscape during the problems was negatively affected. The results also show that there was no increase in brand exposure for Norwergian during the problems.

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

The projects goal was to make an already existing indoor positioning system useful forthe average smartphone user. This was achieved by creating an Android applicationwhich, along with a running server, continuously presents the user with all the currentneeded information. It uses the graphics engine andEngine to create the graphical userinterface. The application was created in the development environments Eclipse andAndroid Studio..

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.