AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

The scope of this master thesis is the scientific publishing at Uppsala University's Faculty of Arts. The aim of the thesis is to investigate publication patterns and publishing strategies. To investigate how the publication patterns of the faculty is structured and what priorities and considerations the researchers have regarding scientific publishing. Furthermore, the aim is to compare these publishing strategies and publication patterns to incentives and selection principles of the bibliometric indicators in the performance based research funding systems on the national and local scale.The thesis is based on the theories of disciplinary differences developed by Richard Whitley and Tony Becher and Paul R. Trowler. These theories suggest a framework based on organizational and sociological perspectives, that offers ways to explain differences in publication patterns between different scientific fields.The study is based on two empirical studies of the faculty.

The purpose of this masters thesis is to examine the fanzine, a form of amateur publication, in Sweden, both in the traditional paper form and the more recent electronic form. It deals with what is distinctive about the fanzine as a publication and also as a social and cultural product. It also looks upon how the fanzine uses the Internet and the new possibilities it brings. The people behind 18 fanzines, 10 electronic and 8 in paper, have answered a questionnaire about how they produce, publish, distribute and promote their fanzines, what they think about the fanzine as a mode of expression, and how they use the Internet. The masters thesis uses theories within cultural studies as a theoretical approach to the fanzine.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Impression of reality deals with the subject of wearing a mask. It is an exploration of the idea that we are all playing different roles, on a stage in front of an audience. The aim was to work conceptually with text, photo and video as a way of exploring a subject. The goal was to create and edit the material so it would be interesting for the visitor at the graduation exhibition. The content was created through experiments based on questions such as the following examples; What is a mask? How can content control form? What is originality? The process resulted in a publication and a video installation with the ambition of highlighting the idea of the world as a theatrical construction.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

Sweden is one of five nations in the world manufacturing fighter aircrafts. Highly advanced technology is needed in order to develop a fighter aircraft. When developing advanced technology, new applications, other than those initially intended occur, spin-off. Some of Sweden?s largest companies are spin-offs from the fighter aircraft industry.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

This our bachelor thesis of 15 p ECTS. Our subject is What makes a good park? ? And how to make it better. The purpose of our bachelor thesis is to provide an overall direction for instrinsic qualities, resource (areas and materials) maintenance, visitor use, visitor experience and a basic foundation for decision-making for the maintenance and enhancement of the parks in Danderyd municipality.

I denna rapport undersöks hur elektroniska böcker (eBooks) enligt standarden Open eBook Publication Structure kan komprimeras på ett effektivt sätt. Anledningen till att området valts är att en välanvänd standard för eBooks inte finns för tillfället. Standarden är relativt ny och senaste versionen av specifikationen har kommit ut under 2002. Med i utvecklingen av standarden finns många stora företag som exempelvis Adobe Systems Inc. och Palm Digital Media.

Saab Component Maintenance in Linköping, Sweden, offers maintenance, repair andoverhaul (MRO) services for civilian and military aircraft components. Lately, thedepartment has struggled with slow throughput rates, despite various counteractingattempts. Studies show, that large parts of the delays derive from the logisticsdepartment where goods arrive and dispatch. Therefore, Saab wants to carry out anextensive analysis of the department in order to further investigate what is causing itsslow throughput rates.The thesis begins with extensive mapping over Component Maintenances whole valuestream to find out how departments interact with each other and which roleindividual departments have in the total supply chain. Out of 13 000 different partnumbers, components were divided into five product families.