The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Climate changing is a growing problem for many countries and communities over the world. The cities has a huge work to deal with in their reforcements of their cities to be resilient ones. This thesis makes an effort to investigate and illuminate some of the problem the cities has to solve related to flooding, hazards, erosions, rising sea levels and crotches. This thesis will help to find solutions that international and national efforts has produced and handed out to each other. A lot of communities are charing their excellent tools that works for them.

The purpose of this paper is to understand the climate of the street and how it can be modified to better meet the needs of the street and the user groups. At the same time the conditions of the street and its surroundings also has to be taken into account. To accomplish this it is necessary to have a broad knowledge of the climate conditions in the city. Therefore an overview of the climate elements and how these are modified in the built-up areas are given. The part of the paper which deals with the city climate has a global approach to be able to give an as complete picture as possible.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

Syftet med denna uppsats är att skänka en grundläggande illustration av hur relationen bildinom bild och skräck kan se ut. Studien koncentrerar sig på estetiken och reflexiviteten hosbilderna inom bilden hos de japanska skräckfilmerna The Ring, Pulse och Dark Water. Dessabilder består av ett videoband i The Ring, webbkamerabilder i Pulse och övervakningsbilder iDark Water.Användningen av rörliga bilder inom rörliga bilder är reflexivt i den meningen att vimedvetandegörs om filmmediet självt som en konstruktion av bilder. Detta fenomenuppmärksammar oss också på akten att se. Syftet i skräckfilm är att skapa känslor av olust ochskräck hos oss och detta åstadkoms, bland annat, genom hur bilderna ser ut och är upplagda.Ett återkommande element hos bilderna inom bilden hos våra filmer är otydligheten hosflera av dem och detta att vi inte kan se bilden tydligt kan ge upphov till olustkänslor.

During a fire large amounts of particles and unhealthy agents occur.  Polyaromatic hydrocarbons (PAH) and toxic metals are examples among many others. These agents have a capacity to bond to particles and when the fire is extinguished, the particles can be transferred with the extinguish water into the soil and to the groundwater.Recent studies in particles have been conducted. A study by Ulrika Iverfelt (2014) reviled that the particles from a fire contained large amounts of both PAH and metals, which is consistent with earlier analyses. Her column experiments with particles in the size ? 11 microns and ?100 microns in silica sand, reviled that the larger particles was immobilized because the transportation was influenced by sieving or physiochemical particle and surface interactions.The transport of the particles in soil and groundwater is regulated by two main mechanisms: physiochemical surface interactions and straining.

ABSTRACTThe fauna of the Lower Cambrian is far from fully understood, as is the environment of that epoch. Some of the most crucial moments in the history of evolution takes place during this epoch; the Cambrian explosion and the appearance of ecosystems as we know them. That makes it an important period to investigate. Doing so, the Lower Cambrian offers a lot of problems, one of which is that body fossils are seldom preserved. That has often left us with trace fossils to create an image of the Lower Cambrian life, but also some bedrock features such as ripple marks.The main purpose of this work has been to investigate the possibilities of relating the wave lengths and forms of recent wave-generated ripples to fossil ones, and also to evaluate the methods for that kind of comparison.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.