SammandragDetta examensarbete utförs i samarbete med företaget Componenta Wirsbo AB. Componenta smider detaljer till den tunga fordonsindustrin. Företaget använder sig av sänksmide där materialet formas genom slag från två rörliga verktyg. Smitt material har mycket goda hållfasthets egenskaper samt en mycket homogen struktur.Företaget har som miljömål att minska sin uppvärmningsenergi med 5 %. Componenta arbetar även med ett Leanprojekt som ska leda till en mer kontinuerlig produktion.

?Are the headwaters streams at the right position in the map? is a study that has been performed on behalf of Holmen Forest, region Örnsköldsvik. This study will be the basis for deciding if the Hydrology Layer Property map or Holmen Forest map will be used for planning nitrogen fertilization in forestry. The background to this study is that nitrogen fertilization near water will increase the risk of nitrogen leaching out into the water systems, which has a negative impact on the environment. The headstreams positions have been recorded in the field with a GPS and the data analyzed in the geographic information system ArcMap.

This bachelor thesis discusses firefighting and the use of portable fireextinguishers in the salvageof historic artefacts focusing on textiles. It also looks into the use of multi-purpose dry chemicalextinguishers in a textile context and the impact the actual dry-agent has on textiles afterfirefighting.Literature studies, interviews and tests on different textiles were carried out to write this thesis.During the tests textiles were exposed to the dry agent and also to dry agent plus water toinvestigate the difference in residue. After vacuumcleaning it was clear that when the textile wasexposed to dry agent and water it was almost impossible to remove the chemical without rinsingin water.By examining the residue left on the textile using SEM it was possible to see if a textile was aswell decontaminated after vacuum-cleaning as it looks to the eye. We know that the dry agentoften consists of ammonium phosphate which acts corrosively on many materials and one canassume it damages textiles as well after longer exposure.Buildings housing cultural collections are vulnerable as we cannot easily replace ruined materialwith new.

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

The non-governmental organization Gram Vikas primary concern is to establish clean water in remote areas inhabited by often aggrieved tribals and low caste communities. Gram Vikas? slogan is Water for dignity. It refers to that everybody, regardless whereupon the social ladder you are, are entitled to the most fundamental elements for a dignified life. The purpose of this essay is to highlight the factors that are important for a shift to a more equal and sustainable living.

This work investigates the breeding success of the Black-throated Diver, Gavia arctica, related to the water quality in three lakes located in the Vallentuna area, north of Stockholm, Sweden.For more than 30 years, I have studied the bird life around these three and other nearby lakes, and noticed that the Black-throated Diver breeds in some lakes, but not in others.The results confirm that the deep and clear lakes Tärnan and Stora Harsjön have good water quality regarding pH, alkalinity, aluminium and Secchi disk values. As expected, the Black-throated Diver shows breeding success in those two lakes, but does not breed in the shallow and eutrophic lake Mysslingen. .

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Topography is an important parameter for catchment hydrology, since it is a driver for water flow. Moreover, topography serves as a basis for hydrological models, e.g. ?Top-model?, which is based on a topographical wetness index (TWI). Few studies of TWI have been conducted on agricultural catchment scale. Four fields were studied in a Swedish drained agricultural catchment in order to evaluate the influence of topography on soil wetness.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Ett vattentanksystem och tillhörande styrelektronik utvecklades på Rubico AB i Luleå under sommaren 2011. Detta andra ordningens reglersystem består kortfattat av två vattentankar med individuella nivågivare, en pump och en störflödeskran. I dagsläget används utrustningen vid laborationer på Luleå tekniska universitet i en grundkurs i reglerteknik. Avläsning av nivågivare och styrning av pump i det existerande systemet sker analogt via ett externt DAC-kort kopplat mellan reglersystem och persondator. Regleringen sker på datorn med hjälp av mjukvaran RegSim.

Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

This master thesis was carried out for Saab Avitronics, a business unit of Saab ABactive in electronic systems for military aircrafts. Reliability and weight are of crucialimportance in this environment. To improve reliability and lower the weight graphitemay be used for electronics cooling. Graphite is an anisotropic material and hasthereof high thermal conductivity in two directions (in-plane) and a relatively lowconductivity in the third direction (through thickness).The purpose of this thesis was to investigate if graphite is an adequate thermalconductor to use in PCB carriers. The carriers support and cool the PCB by divertingthe heat dissipation from the PCB components to the edge.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.