Erythropoiesis is a complex and carefully controlled process which is mainly regulated by erythropoietin. Using flow cytometry cells in a blood sample can be analyzed one by one. ADVIA 2120 using flow cytometry for analysis of red blood cells (RBC) and reticulocytes. Red blood cell distribution width (RDW) is a component of the RBC method. RDW indicates size variation on erythrocytes and is measured as a percentage of the mean cell volume (MCV). By measuring the RDW anemia can be divided into makrocytic, microcytic or normocytic. Reticulocytes refract light more strongly than red blood cells because they contain some cellular debris. The number of reticulocytes in the peripheral blood reflects erythropoiesis in the bone marrow. The purpose of this project was that by approved methods to establish reference ranges for the parameters, RDW and reticulocyte counts.The individuals who participated in the study, n=124, were considered healthy and had varying ethnicity. Reference subjects had not donated blood the last six months and participation in the study was voluntary.The statistic evaluation includes examination of distribution, and reference ranges for both men and women were established using the 2.5:t and 97.5:t percentiles. The calculated reference interval for RDW was between 12.0 ? 14.3% and the calculated reference interval for reticulocytes was between 38.0 ? 112.8 x109 cells/L. The results showed a significant difference between males and females for the parameter reticulocytes was seen. The difference indicates that different reference ranges should be established for men and women (p<0,0001). No significant difference between males and females were seen for RDW (p=0,74) indicating that the same reference ranges can be used for both men and women. .

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

Hur kan svårighetsprogression användas i skapandet av Puzzlehunts med syfte att uppnå en ökad upplevd känsla av flow hos spelaren? Denna frågeställning behandlas i uppsatsen och problemet som måste lösas är hur man kan bygga upp en ackumulerad kunskap om något vars syfte är att hela tiden tvinga dig att hitta nya lösningar på problem. I mer traditionella spel kan upprepning lära spelaren hur spelmekaniken fungerar. I puzzlehunts kan upprepning av spelmekanik inte användas eftersom målet för varje pussel är att hitta mekaniken som löser problemet. Uppsatsen visar att man genom inlärning av hur man skall tänka för att hitta lösningarna till pusslen kan bygga upp en ackumulerad kunskap hos spelaren och därmed även ha en svårighetsprogression och öka upplevd nivå av flow hos spelaren..

Tidigare studier har visat att faktorerna KASAM, flow samt prestationsbehov har betydelse för hög upplevd arbetstillfredsställelse. I denna studie undersöks om dessa faktorer även är aktuella under svenska förhållanden. En enkätundersökning genomfördes på 137 anställda på tre olika företag för att mäta om de tre faktorerna kan predicera arbetstillfredsställelse. Resultatet visade att KASAM, och särskilt komponenten meningsfullhet, var en stark prediktor av arbets-tillfredsställelse. Även flow, och särskilt dimensionen inomboende arbetsmotivation, hade ett signifikant prediktionsvärde medan det visade sig att prestationsbehov inte predicerade arbetstillfredsställelse.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

Results have shown that flow batteries may be a solution in the future as an effective and environmental friendly method to an energy storage system (ESS). The technology is reliable and has a high efficiency that comes with low energy losses and a long lifetime. The range of possible fields is suitable for cutting energy peaks in the power grid, by always have a ready and available energy storage that balances the production. By comparing the advantages of flow batteries with conventional batteries it is mainly the fact that they can conserve energy for a long time without being self-discharged thanks to that the storage capacity is in principle endless and limited by the size of the electrolytes tanks that makes them a great energy storage system. The batteries won?t take any damage or decrease in performance when charging or discharging it or if you exhausts it to 100 % and leave it discharged for a long time.

The aim of this study is to investigate how multiple tree handling harvesters perform compared to earlier developed standards. The study shows that multiple tree handling harvesters are more efficient in thinnings stands with mean stock volumes less than 0,12 m3fub per stock. The increased efficiency is different for different mean stem classes. In stands with a mean stem volume of 0,04 m3fub per stock, the increase can be as high as 40 percent while it is about 10 percent in stands with a mean stem volume of 0,12 m3fub. Comparisons have been done between stands that are felled with partly limbed stands and stands without partly limbed assortments. The difference in performance is clear and shows that the partly limbed assortments strengthen the multiple tree handling harvesters positive effects in low dimension thinnings.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..