Sök:

Sökresultat:

1394 Uppsatser om Air volume flow - Sida 33 av 93

Utveckling av en LC-MS-metod för analys av gamma-hydroxibutyrat, gamma-butyrolakton, 1,4-butandiol, amfetamin och metadon

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

Partnering för bättre samarbete men till vilket pris? : En studie av offentlig beställares argument till partnering

The electric vehicle market has potential to contribute to Sweden?s national goal to have a fossil fuel independent transport sector by 2030. However, the market answers to a lot of challenges making it difficult for the market to fully reach its potential. The volume of electric vehicles has seen a steady increase during the last year (2012), although many of these vehicles are mostly for PR purposes or bought by the public sector that wants to lead by example. Still, barriers in the form of high purchase costs, an anxiety for the limited battery capacity and the lack of standardisation are some of the problems that the market is struggling to solve.

Analys av kundorderuppfyllelseprocessen på Pallco AB

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

Ledtidsreduktion vid ACG Nyström

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Mode & identitet : - Att visa sin insida med utsidan

AbstractAim: The purpose of this thesis is to research how women think about fashion in relation to their self and to others. Can clothes be an expression of who we are who we want to be and how we look at others? What are the main characteristics in this type of communication and what kind of information can be distributed using this tool?Method/Material: InterviewsMain results: Clothes can work as a tool to show who we are and what we are, mainly on short term. We use clothes for different purposes, sometimes we what to be seen and really show who we are and what we stand for and sometimes we just what to go with the flow and not be seen at all. We will always have a physical need for clothes but it is also a natural and important part of our individual expression and our identity.Keywords: Fashion, Clothes, Identity, Lifestyle.

Analys och planering av likviditet : En studie av kassaflödesanalyser och prognosers interna användbarhet inom ABB, Manpower, Gina Tricot och Västerås stad

Nyckelord: Kassaflödesanalys, kassaflöde, likviditetsplanering, likviditetsbudget, likviditetsprognos, likviditet och nyckeltal.Frågeställning: Hur och varför använder de fyra valda organisationerna kassaflödesanalyser och -prognoser internt?Vilka är skillnaderna i de fyra organisationernas sätt att ställa upp och använda sig av kassaflödesanalyserna och -prognoserna och beror skillnaderna på i vilken bransch de verkar?Syfte: Syftet med uppsatsen är att undersöka hur kassaflödesanalyser och -prognoser tillämpas praktiskt i de fyra stora organisationerna ABB, Västerås stad, Manpower och Gina Tricot för att identifiera om skillnader i uppförandet finns.Metod: Studien är av kvalitativ karaktär då fallstudierna av organisationerna gjordes genom intervjuer med representanter på respektive organisation. Totalt genomfördes elva intervjuer med tolv personer. Data till referensramen samlades in genom sekundära källor. Insamlad data och information analyserades där referensram och empiri sattes i relation till varandra.Slutsats: Brister i metoden för hur kassaflödesanalysen ska upprättas finns då den i praktiken inte används av de undersökta organisationerna internt.

When Madison Avenue turns into Main Street: Consumer generated advertising as a marketing tool and its effects on online word of mouth

The purpose of this study is to investigate the effectiveness of consumer generated advertising as a marketing tool to encourage online word of mouth. Subsequently, the researchers aim to examine if there are certain design factors in consumer generated advertising that influence the effectiveness of consumer generated advertising in encouraging online word of mouth. The study conducts a multiple case study of several consumer generated advertising campaigns. It consists of in-depth studies of these cases in combination with quantitative analyses of the encouraged word of mouth. The different cases are examined on several design factors that could possible increase the volume of encouraged word of mouth..

Framtagning av beräkningsprogram för helsvetsade balk-balkinfästningar i stål : Verifiering genom fullskalig belastningsprovning

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Arbetsprov i fält på ridhästar

Sport horses are widely used for performance in jumping, dressage, endurance etc. To enable comparisons of horses, training facilities, programs or physical status, an exercise test can be used. Exercise tests are also important to increase knowledge about exercise physiology of the horse considering different ways of training to compare training methods or individual qualities, development of an individual or other investigations of equine exercise physiology. Since several investigations are done on standard- and thoroughbred horses but less on sport horses, it is of great importance to get an overview of the investigations done. Most common is to investigate heart rate and lactate concentration.

Hainan. En kinesisk destination för nordiska turister?

The purpose of this paper is to describe and analyse the Chinese destination of Hainan, with background in a globalizing tourism destination development, for tourism from Finland and Sweden. The questions at issue are regarding what kind of an impact the status as a special economic zone have had upon Hainan, what kind of conditions there are for tourism on the island, in what form participants of the tourism industry want the development to proceed, what the prevailing trend is for distant destinations for Nordic markets and also regarding what kind of potential there is for organized tourism to Hainan from Finland and Sweden.As a foundation for the paper, I?ve composed a theoretical reference for knowledge of China, Hainan and the study of destinations. The sources of secondary kind are literature related to the subject. The primary sources are mainly interviews, field work done at Hainan has given a concrete and personal knowledge of the place.

Objektskoncentration vid slutavverkning

The study is made on behalf of SCA Skog Jämtlands förvaltning which is one of five administration units that SCA Skog consists of. The purpose of the study is to investigate which reduced expenses there are according to spatial concentration of cutting areas. By increasing the spatial concentration of cutting areas it will reduce the need of movements by trailer, also reduce the number of roads that you use during the activities. To be able to perform the study, access to a annual cuttings in nine years have been made available. From this volume new annual cuttings has been created but more concentrated. The two different results have been compared and the results show that concentration of cutting areas generates reduced need for trailer transports and less km road that has to be maintained. But then, if it´s practical viable can be discussed.

Bryggor - En studie av bryggors förekomst i publika bolag och påverkan på träffsäkerhet i analytikerestimat av EPS

Previous studies have shown that there is a relationship between voluntary disclosure and analysts' forecast accuracy. However, there has been no research conducted specifically on bridges. Bridges contain information on how components such as price, volume, foreign exchange rates and acquisitions have impacted the financial performance between two periods. The main purpose of this thesis is to investigate the usage of bridges in quarterly financial information of companies listed on Nasdaq Stockholm. We provide a descriptive mapping of bridges and find that 30 out of 268 companies are presenting bridges as a part of their voluntary disclosures, with large firms being the most frequent users.

Ledtidsreducering ur ett värdeflödes-perspektiv

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Time and architectural representations: the illusion of being eternal

Att beskriva en byggnad som tidlös är bland det finaste en kan säga. Några av världens mest uppskattade byggnader har beskriv- its som just det, tidlösa. Hur kommer det sig att en av den finaste komplimangen och erkännandet en byggnad kan få, egentligen är intetsägande? Tiden går ständigt och det finns ingenting någon kan göra för att ändra det. Människor, djur och även byggnader utvecklas och åldras.

Aktievärderingsmodeller  : Vågar man lita på dem?

Purpose: The purpose of this essay is to apply "Discount Dividend model" and "Discounted Cash Flow model" in reality during periods of economic boom alternatively recession.Method: A quantitative research method as well as secondary data and data collection method is used. This data consists of the company?s annual reports. Totally, 20 companies of different sizes under diverse economic conditions are involved in this data.Conclusion: After reviewing the companies? calculations, it is noted that the both models that are used reflect better stock-exchange rate during an economic recession..

<- Föregående sida 33 Nästa sida ->