Inventories of epiphytic lichens on Scots pine (Pinus sylvestris) were conducted at three sites in east central Sweden: along the newly build motorway (Road E4), along the old road (Road 600) and in a reference site, to compare the effects of traffic pollution on lichen diversities. At each site, species richness, lichen mean sensitivity value (MK), air quality index of the forest stand/sample plot (LKI) and nitrogen impact value (N) were calculated and it was tested if there was any difference between the sites. Twenty-four species were observed in total, and Parmeliopsis ambigua and Hypogymnia physodes were the most common species at all sites. At Road E4, fewer lichen species were observed than at the other sites and this might be due to the impact of air pollution. The species richness at Road 600 was similar to that of the reference site, which might be explained by the improved air quality.

For many decades the increase in traffic volume, expansion of highways and infrastructure has lead to an increase of wildlife vehicle collisions which are unfortunately very common in many countries today. They cause great deal of material damage and even kill humans or wildlife. Measures in the form of warning signs, under- and overpasses and fencing have been implemented for a long time with the help of observation by hunters and collisions sites. However this study focuses on the moose?s perspective and the variables that, both spatially and temporally, could have an effect on why and when moose are close to certain types of roads.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

The objective of this study was to examine three common mobile phoneplatforms in relation to their network traffic features. The platforms to beexamined are Android, iOS 5 and Windows Phone. After the investigation wascompleted a prototype application was implemented in order to demonstratethese features in the most suitable platform. The application will function as atelephone call exchanger. In addition, the application must also send the userstatistic to a Web server, accept contacts from a Web server, as well as having aspecial administration part in which the userstatistc can be presented.

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

This thesis is about the idea of public transport and the discussions stirred in the media during changes in ownership. More specifically it is a study of the historical situation of Stockholm, Sweden, where the periods chosen are the 1910s, 1960s and 1990s.During the 1910s Stockholm?s first and largest tram company was taken over by thecity, and a period of public ownership began, which in the 1960s changed form whenthe county council took over the city?s principal authority and formed the politicallyadministered company SL (Storstockholms Lokaltrafik, Greater Stockholm LocalTransit Company). Between these periods the word kollektivtrafik (public transport)was established in the Swedish language. This study describes and compares the ideasconcerning the phenomenon of public transport.The aim of the study is to analyse the ideas, values and ideals concerning public transport in the media, defined as newspapers.

Dagens bilar är gjorda för långa resor med högt ställda krav på bekvämlighet och komfort. Studier har visat att de flesta resor som görs i Storstockholm är korta, och därför är kravet på prestanda och komfort minimalt.Syftet med detta projekt var att ta fram ett enkelt pendlingsfordon som del av ett hyrsystem. Användaren hyr fordonet vid en station och lämnar av den vid en annan.Fokus har legat på att utveckla en parkeringslösning som spar plats. Att bygga parkeringsstationer i förbindelse med befintlig kollektivtrafik är svårt, och marken i Stockholm är både begränsad och dyr.Efter en omfattande förstudie fastställdes en kravspecifikation som låg till grund för den fortsatta konceptutvecklingen.Det slutgiltiga konceptet blev Electric Commute Vehicle, ett elfordon avsett för personlig transport och pendlingstrafik. Fordonet döptes till X-traffic (Cross-traffic) och har utrustats med en unik parkeringslösning där fordonen packas likt kundvagnar.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

A great amount of todays drivers? are constantly exceeding the speed limits on the roads. As a consequense of this, a large number of speed redusing devises, for example speed bumps, has been built around the country. As reports in local medias point out, the acceptance for these types of speed reducing devises, differs and there are many thoughts about location, construction and effect on the traffic safety. This paper approaches the complexity of these problems from the drivers? point of view, based on literature studies and a questionnaire. The goal is not to argue for or against speed reducing devises, but to try to find the source of annoyment and how to proceed further. Some of the problems turned out to be easy to fix, for example porly marked speed bumps.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.