The aim of this study is to investigate how Swedish listed real estate companies use quantitative sustainability measures - mainly sustainability index with a financial focus. Sustainability management is a controversial issue that is used more and more constructive. A sustainable management approach in corporate cunduct is complex and based on a number of aspects of business visions, objectives and daily procedures. The study identifies aspects that are considered relevant in real estate companies where the selection of sustainability indicators is based on the support of scientific research in this field. The study intendeds to clarify how Swedish listed real estate companies have selected aspects and indicators of sustainability management and how these work towards a sustainable development.

This master thesis has three purposes. The first purpose is to give a theoretical background of how to divide up forest estates and to study how the legal system for these matters works. A literature study has been carried out to give the background and a theoretical model has been made for analysing the law cases. The first purpose also partly touched the decision process in dividing up forest estates from point of view of the law of land parcelling (FBL), point of view. The second purpose is to examine effects of a change of production requirements in 3 cap.7 § FBL as regards dividing up forest estates of private forest owners.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

The construction and real estate industry represents a significant part of Sweden's total impact on the environment and mainly affects the following national environmental objectives: reduced climate impact, a good built environment and a non-toxic environment. By establishing internal rules, companies within the industry can reduce their environmental impact. SMT (AB Sandvik Materials Technology), a part of the industrial group Sandvik AB, has set a target that during 2014 develop a guiding document with special consider to the environmental impact during construction of office buildings, that they establish at the Swedish regional capital Sandviken, for both internal and external tenants. This study therefore aims to clarify which environmental aspects that the construction and real estate sector mainly are responsible for, and therefore should be part of a guiding document for a company for establishing office buildings, and to present arguments regarding the use of such a document. The study is based on literature studies and personal contact with other companies, in the form of e-mail conversations and a telephone interview.

The origin of the word ?communication? is the Latin word communicare, meaning to make common. The reason for our communication is to share thoughts, feelings and information, we want to affect and confirm.We are used to interpersonal communication, but even if we have had a lot of practice at it during our lives, we still find our selves facing misunderstandings and conflicts. The more people we meet during a day, the greater the chance is for interruptions in the communication.In pharmacy practice, good communication is vital for the client?s health and quality of life.

The main objective with this study was to investigate so called odd purposes acceptable when registrating property along with how social development affects these purposes, furthermore to investigate how the cadastral surveyors estimates a foreseeable time. Tradition and praxis is used for several obvious purposes such as housing, farming, forests, offices and industry. Praxis is yet to be defined regarding more unique purposes. There is no mention in the law about which purposes are found acceptable to assure the demands on suitability are met. Cadastral authorities are responsible for making sure the division into property units is uniform and rule of law-accordingly.

Intramuscular injections to cats can generate strong reactions in some individuals while reactions of the same extent, according to the author, not always are recognized when using the subcutaneous route. The reactions are probably caused by fear, stress and/or pain. When the injection can generate pain one has to take that into account, which can be a limitation in treatment. It is well known that injections generate pain, but knowledge about the cause and processes of the injection-associated pain is limited. This is mainly due to the difficulty in finding objects to study pain on, high cost of use of laboratory animals and difficulty to obtain objective measurements. Although there is evidence that there may be a local muscle injury by intramuscular injection, it is not always that the extent of damage is related to the pain experienced. Facts about the causes of injection-associated pain have been studied in a literature review.

The last years? financial situation has contributed to an increased willingness from the banks to handle risks. The most important risk to cope with is a risk that is related to a customer?s ability to repay loans. Forecasts indicate that in the future, Swedish farmers will be facing profitability challenges, which points to a need to reconsider the banks procedures considering risk management in credit granting for agricultural businesses.Today?s risk management will be given two complements in this study.

The last years? financial situation has contributed to an increased willingness from the banks to handle risks. The most important risk to cope with is a risk that is related to a customer?s ability to repay loans. Forecasts indicate that in the future, Swedish farmers will be facing profitability challenges, which points to a need to reconsider the banks procedures considering risk management in credit granting for agricultural businesses.Today?s risk management will be given two complements in this study.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

The aim of this study was to investigate and analyze similarities and differences in trials and punishment from a gender perspective, during the inquisition in the episcopate of Linköping. A inquisition initiated by duke Karl but performed by archbishop Abraham Angermannus in the year 1596.During the working process a quantitive method was used in the purpose of getting statistic data considering number of men and women that were trialed and punished. A hermeneutic qualitive method was also used in the purpose of closer investigating certain cases that men and women were involved in. The theoretical concepts that have been of importance and used in this study are the individual and the female subject that is based on gender in judicial procedures.The results showed that 49 % of the men were trialed for quarrel. Not as many men were trialed for contempt towards the church and witchery.The most frequently used corporal punishment in this cases were flogging that were executed for totally 38 % of the men.The investigation also proved that men were punished with these forms of corporal punishments for showing their contempt towards the church.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

Many companies are presently investing in different types of environmental strategies, and it is varying to what level they channel their resources to environmental efforts. It is also diverging to what extent organizations effort to profile themselves as environmentally conscious. This can be due to difficulties in reaching out to customers and to finding the most efficient method of green marketing communication. The aim of this study is to analyse how an insurance company more actively can communicate environmental matters foremost in their contact with customers. One can in different mediums daily follow debates and discussions concerning the environment. Many insurance companies have also identified their role in performing green work.