AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

Starting point to this Paper is the idea and wish to adapt the society and its different activities to a recycle society. A building area in Göteborg is planned and investigated for such adaptation. In the district named Skogaberg, about 130 households totally are planned from what 20 are blocks of flats. The idea with this project is to constitute an alternative sewage system, a Blackwater system, were the fractions of most nutrients and least pollution are separated, taken care of and utilised. The aim is to get a market and use the nutrients of the organic waste from the household in agriculture use.

People who live in northern part of the world spend much more time indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

A large part of Sweden?s green, urban landscape is covered by lawns. Approximately 80 000 ha of maintained grass lawns are part of public courtyards, schoolyards, parks, golf courses, sport fields and traffic environments. Beyond this figure, the lawn is also an essential element in most private villa-gardens. Lawns have become a universal phenomenon through the dispersion of landscape aesthetics from the Western world.

The nitrogen cycle in freshwater bodies is complex and consists of many separate processes affected by a number of important factors for example oxygen concentration in the water, temperature and circulation. Knowledge of the different components of the nitrogen cycle exists; however, a complete and comprehensive picture is difficult conceptually as well as theoretically. The available literature illustrates that the research on nitrogen and the related freshwater processes is still associated with high uncertainty of how much of the supplied nitrogen from the catchment is transported with the water versus and how much is lost due to denitrification, sedimentation or uptake by plants. This report is an interdisciplinary survey of Nitrogen discharge permitting. The research focuses in particular on the decision-making process, the levels of scientific standard and the administrative framework.Application for Nitrogen discharge permits are decided by the Environmental Court with council from their own experts as well as relevant government authorities and organisations.

The increased interest in a sustainable environment puts pressure on companies in the manufacturing industry. Rexcell Tissue & Airlaid AB (Rexcell) in Skåpafors produces paper to be converted into tabletop and hygiene products. Rexcell is certified according to the environmental management system ISO 14001, gaining competitive advantages by showing that the company works toward a sustainable environment and that they follow current legislation. The activities at the company are classified as hazardous to the environment according to the Environmental code. Every year, the activities are inspected by an independent inspector.

The current demanding business environment requires corporations to act fast in finding effective solutions to problems given the myriad of challenges they face (Dyllick & Hockerts, 2001). The challenges include the impact of climate change on business practices, natural resource consumption, chemical pollution, technological change etc. Moreover, the forces of globalization, heightened concerns about the deteriorating quality of the physical environment and increased stakeholder power are also increasingly having a real influence on business practices (Rainey, 2008). Since 1992, the World Business Council for Sustainable Development (WBCSD) has encouraged the adoption of the concept of ecological efficiency (eco-efficiency) to support business efforts aimed at addressing some of these challenges. The aim of eco-efficiency is to reduce the amount of energy and materials used in production processes to achieve economic and environmental benefits (WBCSD, 2000).

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

This Master Thesis covers the concept of Green Cars. The background to the research area is the high and rapidly growing number of cars, which together with other factors ad to the pollution of the environment. Under the Kyoto agreement the signing members agreed to lower the emissions of green house gases, further on the EU has a 3-pillar strategy on carbon dioxide and cars. Included in the EU strategy is a voluntary commitment from the car industry to reduce carbon dioxide emissions from new cars. The easiest way of lowering the emissions is by using alternative fuels and engines.

Modern forestry requires a high degree of machine traffic for clear felling and scarification operations. The machines most frequently used are big and the traffic often results in tracks on the forest ground. There are many small streams running through a forest, in connection to logging operations, machines might cross these frequently. These crossings could result in the erosion of fine particulate inorganic matter, which ends up in the stream. The aim of this thesis was to give a general description of small forest streams of order-one in the county of Värmland and to determine the frequency of machine tracks in small streams.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Syftet med denna studie har varit att undersöka de multinationella företagens ?tvingande joint venture-avtal? med de kinesiska tillverkarna, och hur det påverkar teknologisk överföring. Som metod för att samla in information valde uppsatsförfattaren att genomföra kvalitativa intervjuer, vilka var semi-strukturerade. Genom ett icke-sannolikhetsurval valdes tre företag ut för att delta i studien.Studiens slutsatser tyder på förutsatt att den kinesiska regeringens krav på joint venture-avtal reviderades eller helt slopades och de multinationella fordonstillverkarna därmed fick valfri möjlighet till FDI, då skulle det leda till att färre företag ingår joint ventures med kinesiska tillverkare. Dessutom ökar incitamenten för de multinationella företagen att överföra teknologier till den kinesiska fordonsindustrin om de har möjligheten att fritt bestämma FDI, däremot är det ingen garanti för mer effektiva teknologier.