The aim of this study is to examine the market reaction when information about a company?s foreign direct investment is announced and how that affects the shareholder?s value. Also of interest is whether the market reacts differently depending on which country the investment is established in and which mode of entry is used. This will be achieved by using an event study approach. The selection that was used consisted of 206 companies registered on the Nasdaq OMX Nordic homepage, which had during a time period stretching from 1999 to 2009 established a foreign direct investment in the regions BRIC, Europe or the USA using the mode of organic growth, joint venture or acquisition.

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..

The authors of this thesis have studied the handling of personal information in various kinds of organizations, because the perception is that the knowledge in this area is weak relative to the weight of the subject.The purpose of this paper has been partly to shed light on how knowledge of this area in the organizations that we have visited during the study but also to answer questions about handling, knowledge and security, and identification of individuals in different systems. What kind of problems the processing of these data creates and why these problems occur.In the beginning of our study we understood the importance of using the correct identifier and therefore chose also to examine what the various identifiers used by the organizations and why they chose these particular identifiers.In the qualitative analysis, Datainspektionen´s general rules and advice has been used as a basis together with the laws applicable to the organizations to get a good picture of how management of personal information is in these organizations.What we have found in this paper is that knowledge about how personal data is handled and what laws and rules are saying is very much dependent on how central the information is to these organization's activities. The police use so many different types of records for their organization to function well and they have very good knowledge of laws and regulations. In contrast, schools that do not handle as much of personal data themselves nor have the same knowledge among staff and do not have enough resources to cope with keeping the same knowledge base as the police. This is something that applies to all types of handling, depending on how important the information is for the organization, the better the security and knowledge in handling the data is..

Jämtkraft AB has recently modernized its hydropower station at Hissmofors by replacing four older worn out units with two new units. The generators uses a concept with sliding stator feet to deal with the thermal movements that occur in the stator during operation when the unit is operating intermittently. At other sites, this method revealed shortcomings in the reliability. This has made Jämtkraft AB feel uncertainty about its function and therefore want to investigate it during an early stage. The generators have a built-in monitoring system for the sliding stator feet and by using data from there the function of the sliding stator feet has been investigated. The study focused on how the different stator feet move relative to each other and how the eccentricity and deviation from roundness changed during operation. The results show that there are several indications that the function of the sliding stator feet is not satisfactory.

Arbetets syfte är att få en bred kunskapsbas för att förstå vad koncentrationssvårigheter är och hur de kan se ut i klassrummet. Syftet med studien är även att söka förslag till handling för att stävja koncentrationssvårigheter. Det är en litteraturstudie av medicinsk och pedagogisk forskning kring koncentrations-svårigheter. Med hjälp av en fallstudie genom intervjuande samtal med en elev och skolans specialpedagog beskrivs verkligheten på just den här yrkesorienterade gymnasieskolan. Resultatens första del beskriver koncentrationssvårigheter till hjälp för förståelse av begreppet.

Soft rubber flooring have gained in popularity over the last years. Rubber flooring al-lows cow to move more freely without slipping and improves claw and leg health. The purpose of this study was to investigate the influence of a stepwise introduktion of soft flooring on cow`s placement in cow houses with robotic milking. A case study was carried out in a herd in northern Sweden with 41 cows. Observations were made every 15 minutes between 09.00 and 16.00 concering cow placement in cu-bicles, in cubicle alley, in feeding alley and in feeding alley with the head through feed-ing gate. One observation period was carried out per flooring alternativ: 1) all concrete slatted floor, 2) rubber slatted floor in feeding alley and concrete slatted floor in cubicle alley and 3) rubber slatted floors in feeding alley and solid rubber floors in cubicle alley. The study showed that 6 %-units fewer cows lay in the cubicles when the feeding alley surface was slatted rubber.

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .

Uganda is one country with fastest growing populations in the world and with more than 25% of the population living in poverty. There is a rapid rural urban migration with increasing demands for food for low income earners especially in these areas. One way to mitigate food insecurity is to increase milk and meat production efficiency, and thus reproductive performance of cows is crucial for good production. A well-documented strategy for improving dairy cow productivity through faster genetic improvement is to breed dairy cows using proven semen via artificial insemination (AI). AI has been used in Uganda for over 60 years but only less than 10 %, a small population of the country?s herd has been bred that way. The aims were to study knowledge, attitude and practices factors influencing cow fertility results on dairy farms around Kampala using AI and to propose ways of promoting increased use of AI in Uganda.

AbstractPurpose ? The purpose of this study is to examine the challenges that exist within thematerial handling process, to and from a department for service and maintenance at a hospital, and how the challenges can be managed to achieve a more efficient material handling process. In order to fulfill the purpose the following two questions where formulated:1. What challenges exist within the material handling process, to and from adepartment for service and maintenance at a hospital?2.

During the last 20 years, the Swedish health care system has faced major changes. One of them is the increasing pressure to generate economic profit due to private businesses entering the market. Health care units are forced to make some structural changes in order to become effective and efficient. As a result merger and acquisitions has become a part of the health care sector, and seems to be an increasing phenomenon. Mergers and acquisitions have mainly been studied in the industry.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

The purpose of our study is to get more knowledge about how moral dilemmas affect social workers in their work. This because we find that a big part of social work involves ethic reflections and that is why we find it important for social workers to have knowledge about how they should and can think and act in these situations. Ethic statements exist for social workers to use in their work but we haven?t found any guidelines for concrete situations and that?s why we decided to study this area. Questions we want to answer are how do the social workers define moral dilemmas in social work? How do the social workers deal with moral dilemmas in their work? How do moral dilemmas affect social workers in their work? This is a qualitative study with interviews from seven social workers from one social service office although they are from different units.

Wireless communication is becoming more common, a relatively new technology within the area is Bluetooth Low Energy. It?s been developed to be energy efficient and in regard to compatibility. Alongside the growth of wireless technology, scientists and companies are looking for new areas of use. One of these is localization, which means to determine the position of a moving device with the use of stationary devices, an example of this would be GPS.This report means to evaluate indoor localization using Bluetooth Low Energy and was made for Combitech AB in Jönköping.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.