Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

This report is about a couple of specially chosen peatlands in eastern Uppland, Sweden. It concerns their development between the year 1922 and 2012. The historic fact originates from a large investigation of peatlands in the south of Sweden made by the Swedish Geological Survey, SGU, in the 1920?s. To be able to choose peatlands an analysis in GIS were made, in which we were able to find locations good enough for our field investigation. During the field investigation we bore to find nice peat cores that later went through several analyses in a lab.

The economic development and industrialization that has taken place in many parts of the world during the past century has brought about a huge increase in economic welfare. During this process, it has repeatedly been debated whether the gains from economic development are shared by everyone or just a few. In the field of economics, vast research has been conducted on this particular subject ever since the 1950?s. The most famous contribution might be said to be Simon Kuznets article, Growth and Income Inequality from 1955 and the ?inverted U?-hypothesis that was formulated on the basis of that article.

The economic development and industrialization that has taken place in many parts of the world during the past century has brought about a huge increase in economic welfare. During this process, it has repeatedly been debated whether the gains from economic development are shared by everyone or just a few. In the field of economics, vast research has been conducted on this particular subject ever since the 1950?s. The most famous contribution might be said to be Simon Kuznets article, Growth and Income Inequality from 1955 and the ?inverted U?-hypothesis that was formulated on the basis of that article.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

Abstract In order to make the modern agriculture less dependent on non-renewable external inputs, it has to rely more on ecosystem services. The agricultural system produce not only food, fiber and fuel, it also generates other ecosystem services such as e.g. photosynthesis, recycling of nutrients, influencing local microclimate, pollination, biological control and detoxification of noxious chemicals. This study is an attempt to get a better understanding about the interaction among different ecosystem services and different habitats capacity to generate them. An evaluation of eight different methods is done. The ecosystem services studied are the ability to absorb solar energy, biomass production, botanical diversity, decomposition and natural predation of aphids.

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

This study was carried out at the Swedish University of Agricultural Sciences, Dept. of Agricultural Research for Northern Sweden. The aim of the study was to determine how plant species richness and diversity influence the nitrogen pools and nitrogen fluxes in the soil. Plant and soil samples from a biodiversity experiment in grasslands were used. Thirty plots with 12 grassland plant species (legumes, grasses, and non-legume herbs), combined from 1-12 species were investigated.

The main purpose of this master thesis is to identify guidelines for a sustainable production that can provide useful information concerning the establishment of a biodiesel production. These guidelines concern the surrounding production environment, such as infrastructures and industries.The thesis is based on theoretical grounds surrounding industrial symbiosis, biodiesel production and how sustainable development should be designed. A study of an already established producer in a similar business area has been used to provide a picture of similar projects. The thesis has with the supervisor's consent focused on the production conditions that are affected by location.The production conditions selected are heating, raw material market, residual and sustainable profile. These are then evaluated through an Excel-based sensitivity analysis.