Sök:

Sökresultat:

2898 Uppsatser om Agricultural Production - Sida 27 av 194

Vad skulle få en lantbrukare att ställa om från konventionell till ekologisk mjölkproduktion? :

The Swedish government has proposed that 20 % of the cultivated land in Sweden should be organic by the year 2010 (The Swedish Board of Agriculture, 2008). In addition to this the production of organic food like milk, meat and egg should increase considerably. To reach the government?s goal it is necessary that the Swedish farmers get motivated to convert their production from conventional to organic. Milko is a dairy association that has chosen to focus on organic products, they want to be the leading organic dairy association, and therefore they have a large need for organic milk (Milko, 2008).

Uncord Audio - Formgivning av produkt för trådlös ljudöverföring

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

High Orbit Ion Cannon : Går det att skydda sig?

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Foderbetor och kogödsel som substrat för biogasproduktion; anaerob mesofil samrötning i labbskala

One of Sweden?s sixteen national environmental objectives strives to decrease the impact on the climate. By 2020, green house gas emissions should be 40 % less compared to the levels of 1990 and a minimum of 50 % of the energy consumption should come from renewable energy sources. Because of this there is a great need of increasing the production of renewable energy. This is where biogas comes in as a competitive alternative.

Följdeffekter av olika användningssätt för vedråvara : en ekonomisk studie

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

Ekonomiska konsekvenser av etanolproduktion i östra Sverige : en analys ur lantbrukarens och förädlingsföretagets perspektiv

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

Framtagning av korrigeringsfaktorer för enhetstider och kapaciteter : Ett sätt att öka kvalitén på Skanskas normallägen.

Skanska is using work schedules that are specifically designed for employees in the production. These work schedules are called best practice. These are guides containing technical descriptions, design references, capabilities, etc. for work activities. This support function facilitates the work preparation and planning of future work.

Ledtidsreduktion vid ACG Nyström

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Svinnoptimering VTIS1

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

 ?Livsformernas strukturering av mäns och kvinnors vardagsliv på landsbygden :  ?En studie kring könsstrukturerna i djurhållande företag i Kalmar län.

 AbstractThis study is performed by studying seven livestock businesses in the agricultural sector. The focus of the essay has been put on the structures that limit and enable the lives of the farmers in this study. One of these major structures that affect everyday life is the gender structure and to this day the housewife role exists where the women are responsible for the home, family and domestic pets while the men are responsible for the production, machinery and the heavier tasks on the farm. This is grounded in the history and the development that agriculture has gone through, but also in the strong patriarchal power structure that exists in this industry. In this essay I also show how the life form analysis of Liselotte Jakobsen and the independent life form can not be fully applied to the farmer as he is not completely independent in his work.

growforgold.org : a design proposal for creating productive green space in cities

The aim of our master thesis is first and foremost to win the competition One Prize - mowing to Growing: Reinventing the American Lawn, announced in USA by the organization Terreform 1, the first of December 2009. Apart from winning the competition we have also tried to reach a deeper understanding of food production today and its future possibilities. Our ambition to present a winning design proposal has to a large extent decided the structure of the entire thesis. Our completed and submitted design proposal - growforgold.org - is a way of addressing urban food production in a creative way, keeping the sovereignty of the individual in mind. Instead of presenting a place-specific design solution our proposal aims to create incentives and possibilities for urban farming to take place anywhere and anytime. Our submission to the competition represents both a tool and a platform which, put in practice, could make landscape architecture happen through the hands of the individual.

Jämförelse mellan sojaböna och åkerböna som proteinfoder till växande grisar

The soybean can be used in multiple ways, and its high oil content makes it suitable for extraction. Soy bean meal, a by-product of the oil extraction, is a good source of protein with a high feeding value, and is therefore used in a number of different animal feeds. Further, soy bean meal has a low production price, which is one of the reasons for the extensive export of the product. There is a great demand for vegetable-based proteins, especially in the organic production where synthetic amino acids are banned. However, the current production of soy beans is not environmentally sound and that combined with the long transport distances amplifies the need of finding a locally produced protein source.

Traditional milk production in cattle in a semi-arid area in Kenya

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.

Restaurering av våtmarker; Inventering av vadare och andfåglar vid Norra Lingenäset

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

Optimeringsflöde av modelleringsprogram vid broprojektering : Analys av de tre modelleringsprogrammen Tekla Structures, Revit 2013 och Rhinoceros

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

<- Föregående sida 27 Nästa sida ->