The decrease in the number of dairy farms in Sweden has been ongoing for a longer period of time. But the fact is that this has previously not had any big effects on total amount of milk produced in Sweden. The main reason is that the remaining dairy farms get larger. However, during the past year, there has been a decrease in the total amount of produced milk, because the decrease is faster than the increase within the farms that are left. During the same period of time the supply of milk on the global market also has decreased. In spite of the fact that the global supply have decreased and the fact that the milk price increases, there are dairy farmers in Sweden who chose to exit the market.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a roof on top. Both of the buildings are compared to every alternative in the calculations.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

Telepresence production handlar om att kommunicera med video och audiobaserad teknologi i realtid över distans och att generera en känsla av närvaro fastän man fysiskt är på olika platser. Forskningsområdet är ett tvärvetenskapligt ämnesområde som innehåller datalogi, socialpsykologi, kognitiv psykologi och perception så väl som konst och storytelling. Den här uppsatsen behandlar främst den process som utformning av ett videomedierat möte innebär. Det finns olika variabler som sägs påverkar upplevd närvaro, men då människors upplevelser är subjektiva är det en stor utmaning att söka generella slutsatser. Uppsatsen är avgränsat till att endast behandla yttre faktorer.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This report will point out the income for a scania plant production farm, this has been estimated through a case study. The outcome of this report will later be used to calculate a reasonable leasehold charge. This case study is solitary based upon this particular studied farm, at this very point, and can therefore not be used as a general guide. The reason why this particular scania plant production farm has been selected, is because the author is born and raised at the farm and has the intention to run the farm in the future. The chosen farm for this report is based in the southwest of scania and cover 300 hectare of plant production. The crop rotation consists of autumn wheat, sugar beats, spring wheat, spring barely, winter rape and fallow. The farm owns all machinery required.

The past and ongoing structural change in Swedish agriculture has led to an increasing number of large-scale farms. The biological factors associated with large-scale farming operations may cause increasing variability, risk and reduced yields due to sub-optimal timing and management of field operations. The theory of economies of scale suggests that largescale production may benefit from lower costs due to scale efficiencies. Thus, large-scale farms may face cost reductions in terms of long term inputs factors, e.g. agricultural machinery.

As the number of inhabitants increases, the cities expand into the former rural landscape. The urbanization causes changes to the functioning of the peri-urban fringe. Land that previously was used for Agricultural Production is now used for alternative enterprises, as for example horse keeping and recreation. 75 % of all horses (approx. 200 000) are situated in the peri-urban fringe.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

During the end of the nineteenth century and the beginning of the twentieth century Sweden experienced social changes. The proceeding industrialization led to a process of urbanization where people were forced, more or less, in to the cities to find work. The traditional agricultural self-sufficiency society was successively replaced by salaried employment. This meant that family and home was no longer the major centre of production, nurturance and care. In order to support themselves and their families, even women applied for industrial work.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

Study objects: Three different productions companies which the authors have chosen to be anonymous. Purpose: The purpose with this study is to examine why production companies choose to use 3D-animations in television commercials, and what different kind of aspects affects their decisions. Theoretical: The theoretical chapter reviews the history of 3D-animation andtelevision commercials and other fields that will be relevant laterin the analysis and discussion. Method: A case study has been made on three different companies, two of the companies are active in post-production and the other one is active in the consulting area. Data was collected through semistructured interviews with two of the companies.