An increasing amount of companies and organizations are starting to implement the use of cloud computing in their business. This trend results in that software, which was previously sold and distributed to the customers whom then had to install the software on their own computers, now is being replaced with Software as a Service (SaaS). SaaS makes software available through the customers? browsers, which results in that the service providers only have to administer a single application. The process to migrate a distributed application to a service delivered as a SaaS lacks sufficient investigation; this paper will provide some guidelines for conducting such a pro- cess.

This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

In this paper we analyze a social network specifically designed for the elderly, people with Dementia and people with generally low computer experience. This is a relatively unexplored use for such software, and our goal is to find out whether the technique to be used is simple enough to use for the intended user group, and generally how the whole situation is experienced by the users. To achieve this we conducted an expert evaluation and interviewed a number of users at two separate occasions during their first weeks with Modernfamilies. We came to the conclusion that this software generally is simple enough to use for the intended target group. Some of the users we came in contact with experienced the software as a positive addition to their daily lives, while some could not see any reason for a further use.

With the digital revolution within video games, the need for Digital Rights Management (DRM) has increased significantly, alongside with the increasing problem of copyright pirates. To counter pirates, DRM was created to prevent illegal copying of software, this to ensure that the Distributors received an income for their work. DRM has, since the start of its use, been getting, a lot of bad criticism from the users of the software protected by DRM. The main function of this paper is to describe the creation and development of DRM by analysis of the vision of different groups on this phenomenon. The main questions are as follows, is it possible to define the very reason for why DRM was created and if so, can its development through time be defined too? What differences in opinions are there when it comes to DRM, counting the two major groups of creators, sellers, distributors (referred to as distributors) versus individual users (referred to as consumers)? In what way will the research results suggest that the future DRM will develop?The development has gone from solving puzzles in a handbook to start the game each time the user wants to play, to serial numbers that is needed during the installation of the game.

This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

Att skriva enhetstester är en viktig del i nya populära systemutvecklingsmetoder som extreme programming. Med testdriven utveckling skriver man testerna innan den källkod som skall testas. Ett vanligt problem med dessa tester är att de blir beroende av delar i systemet som inte är intressant för själva testen. Mock objekt är en teknik som gör det enkelt att isolera tester från allt som inte är relaterat till det som skall testas.Det finns två sätt att se på mock objekt. Den traditionella synen är att mock objekt skall användas som ett verktyg vid isolering av externa system.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Syftet med arbetet var att ta reda på om den ökade tidsåtgången som parprogrammeringen leder till uppvägs av de fördelar som den genererar i jämförelse med enskild programmering där arbetet delas mellan två programmerare och sedan integreras. I arbetet presenteras resultatet från en enkätundersökning som sju personer från fyra olika företag i Sverige har besvarat. Samtliga personer som besvarat enkäten har arbetat både med enskild programmering och parprogrammering. Vårt arbete bidrar till forskningsområdet programvaruteknik som intresserar sig för mjukvaruutvecklingsmetoder. På senare tid har detta forskningsområde också intresserat sig för lättrörlig mjukvaruutveckling där utvecklingsmetoden Extreme Programming (XP) ingår. XP tillämpar parprogrammering och är en mjukvaruteknisk metod som har att göra med klassisk mjukvaruteknik som bl.a.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

Traditionell systemutveckling präglas ofta av långa utvecklingsprocesser och en oförmåga attmöta förändrade behov från kunden. Problematik med buggar i mjukvaran och förskjutnadeadlines uppstår kontinuerligt och leder till högre kostnader för företag.För att komma till rätta med dessa problem behövs en systemutvecklingsprocess som belyserproblem direkt när de uppstår och därmed tvingar de inblandade till reflektion över processensom skapar problemen vilket belyser de verkliga bakomliggande orsakerna. Låg kvalitet påmjukvara är ofta ett symptom på djupare organisatoriska problemEtt synsätt som syftar till att möta dessa problem är lean software development. Synsättet harinspirerats av lean production som är en beskrivning av The Toyota Production system vilketi sin tur är det arbetssätt som har tillämpats av Toyota under flera decennier i den traditionellatillverkningen.Mary och Tom Poppendieck har beskrivit sju principer och 22 tankeverktyg som kananvändas för att skapa en metod för lean software development. Studien visar vilka styrkoroch problem som lean software development och lean production beskriver generellt samtvilka styrkor och problem som finns avseende beskrivning av Poppendieck's principer ochtankeverktyg i synnerhet.

Sveriges Radio stores their data in large archives which makes it hard to retrieve specific information. The sheer size of the archives makes retrieving information about a specific event difficult and causes a big problem. To solve this problem a more consistent use of metadata is needed. This resulted in an investigation about metadata and keyword genera-tion.The appointed task was to automatically generate keywords from transcribed radio shows. This included an investigation of which systems and algorithms that can be used to generate keywords, based on previous works.