This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

Many workplaces around the world use some kind of presentation software as an aid during presentations. At Westinghouse Fuel Service in Västerås they experienced that they didn´t know how to use this medium to its fullest extent. They wanted to increase awareness of presentation skills with PowerPoint among the employees, to improve their internal and external communication. A desire they are certainly not alone to have in the working life.My research studied how to design guidelines for the use of presentation software, so the users can easily absorb the message and find motivation to use the guidelines. In order to adapt the guidelines to their users, and thus create major opportunities for them to absorb the message, I based my study on the concepts legibility, readability and reading value.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

The purpose of this essay is to examine how health care staff, in dementia care, feel that their work situation is affected by using two methods which are specifically designed for use in work with elderly persons suffering from dementia: validation and reminiscense.To examine this, we used a qualitative research method in the form of semistructured interviews with 6 assistant nurses/nurses. These nurses work in a living with dementia targeting which have recently applied the above two methods. Of the results reveals that nursing staff feel positive effects in their work through the use of validation and reminiscense. Examples of these positive effects are greater inclusiveness and strengthen relations in the staff group, strengthen relations between staff and residents, reduced medication of soothing medicine and improved communication with the persons suffering from dementia. The results show that nursing staff feel that it can be difficult to absorb the working methods, the importance of sufficient time and continuous guidance in the exercise of the methods and the need for a genuine interest for them to generate positive effects.

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

The aim of this qualitative study was to study high school PE teachers´ experience of health in high school and how they work with health in their physical education. This was examined by interviewing five high PE school teachers. The results show that all teachers were in the category humanistic approach. They saw health as more than only absence of sickness. The methods for using health in their physical education were divided into three different categories; physical health, improve the individual and theoretical health.

This thesis examines how knowledge management professionals use trust as a component in the creation of knowledge management systems, and what methods they use for building trust.Adopting a grounded theory approach, interviews with 8 knowledge management professionals active in different industries served as the base for an analysis that identified trust to be the single most important common factor in the data. The concept of trust used by the informants was identified as relating to the knowledge management system itself, rather than other users, employees or groups in an organisation.Building trust, the KM-professionals mainly focused on three methods: simple solutions, system superiority, and implementation security. Using these methods, the KM-professionals seek to ensure system trust by creating opportunities for users to obtain positive experiences of using the system, and thereby generate a foundation for a trust-based relationship between the user and the system..

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

To be able to read and write is necessary to manage well in life. It is important to get a good start in one´s reading and writing development. My purpose in this study was to find out how to teach children to read and write. Obtain knowledge about how to best help children during the early years of reading and writing development, and what is required to teach good reading and writing skills.I wanted to find out how the pedagogues work in the schools, and if they use ant special methods in their teaching. This is something that I, as a future pedagogue didn´t have much knowledge about, which is very important for my future pupils.My research method was qualitative where I interviewed three pedagogues who work whit teaching reading and writing in the early years.

The purpose of this study is to investigate if the class teachers believe that their education has given them enough knowledge about dyslexia in order to succeed a successful education for these pupils. It will present what four class teachers and two special education teachers has answered what they know about dyslexia. The study aims to find out if class teachers believe that they have enough knowledge to determine whether a pupil has dyslexia. If they have knowledge of appropriate methods and if they know how to prevent that pupils fall behind in their literacy and also what factors they believes makes it problematic to implement a literacy for these pupils. I propose the following questions:Do the class teachers consider that their education has given them sufficient knowledge of dyslexia and its characteristics?What methods does the class teachers and special education teachers considers as useful for pupils with dyslexia?What does the class teachers consider can prevent that pupils with dyslexia fall behind in their reading and writing skills?What factors consider class teachers and special education teachers is problematic to to succeed a reading and writing education for pupils with dyslexia?This study is based on a qualitative method and my theoretical approach is based on Høien and Lundberg established view of what dyslexia is.

This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

ABSTRACTSeminar date: 2008-06-04Subject: Bachelor thesis in Business AdministrationAuthors: Charlotta Lind Therese LundinBorn: 1982 Born: 1982Västerås VästeråsTutor: Ulla PetterssonTitle: Company valuation- A study in which valuation methods that areused in determining the value of producing companies and servicecompanies.Problem: According to the theory there are a number of different valuation methods which can be used to determine the value of producing companies and service companies. The thesis research problem is:- Which valuation methods does a valuator use in practice todetermine the value of producing companies and servicecompanies?- Does the valuator take different types of information andkey ratios in consideration when valuating producingcompanies and service companies?Purpose: The purpose is to examine and describe which valuation methods a valuator uses to valuate producing companies and servicecompanies in an acquisition.Method: In order to achieve the purpose of the thesis a quantitative survey and three qualitative interviews, made by email, has been carried out.Conclusion: The conclusion of the thesis is that discounted cash flow and relative valuation are used to determine the value of producingcompanies and service companies. The valuators choice ofvaluation method is not generally affected by the nature of thecompany?s operations.Keywords: Company valuation, valuation methods, producing companies,service companies, relative valuation, discounted cash flow.

Mathematics is a central topic in today's education debate, including discussion of its educational quality and various teaching methods. Today basically two different teaching methods are used; one is the textbook based method, with the book in focus and the other one the laboratory method by which teaching is performed through practical applications. The purpose of this study was to examine four primary school teachers' view of these two teaching methods by means of four relevant inquiries. By interviewing the four teachers, advantages and disadvantages were highlighted and the purpose was achieved. In order to support the analysis, two theories applied; the socio-cultural perspective and the cognitive perspective.