Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

Background: It has become important to be able to take advantage of employees' ideas for organizations today.  The contributed ideas can be developed into innovations. However, there are difficulties for businesses to take advantage and develop the employee provided ideas. It can lead to a stop in the organizations development.Purpose: The purpose of this paper is to gain a greater understanding of how organizations can take advantage of the employees' ideas and develop them into useful innovations for organizations.Method: The thesis consists of precipitated studies from the three organizations, a manufacturing company, a service company and the municipality of Karlskrona. The paper is based on qualitative research by collecting valuable insights through interviews.Conclusions: In this study, it has been proven that organizations today have a magnified view of the concept of innovation. They have difficulties in implementing the concept in day to day operations.

CSR - "Corporate Social Responsibility" is a concept that in recent years has become of bigger importance for companies. Even at McDonald's, which quickly grew into today's 217 restaurants, with up to 430 000 visitors daily. We have investigated how the McDonald's CSR work has evolved over time, how it looks today and what has influenced this development. Things that have influenced McDonald's and led to their CSR work proved to be scandals and changes in legislations. The PR value of working with CSR has also increased and a lot of the CSR work has shown to be economically viable.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

A large part of the time losses in production in modern manufacturing industry are a cause of unplanned interruptions in production. In this essay we have studied the effects of an unplanned interruption in production. The study was performed during one month on a press production line at Volvo Cars Body Components (VCBC) in Olofström. The effects of the interruptions have been studied on the basis of two perspectives of the environment of the production. The study started at the level of automation and was mainly done as a survey of the unplanned interruptions in production.

Examensarbetet har sin ansats i utvecklingsmetoder närmare bestämt den lättrörliga utvecklingsmetoden Extreme Programming (XP). Beståndsdelen i en utvecklingsmetod är människorna, deras erfarenheter och kunnande samt deras förmåga att skapa idéer och lösa problem såväl enskilt som tillsammans. Utan nödvändig kompetens inom utvecklingsteamen ökar risken att utvecklingsprojekten misslyckas eller försenas. Syftet med detta arbete är att utifrån intervjuer med systemutvecklare undersöka vilka nödvändiga kompetenser som är nödvändiga för att XP skall kunna användas på ett effektivt sätt, även att uppmärksamma vilka problem som kan uppstå då den sociala kompetensen saknas. Metoden som har använts för att undersöka vilka faktorer som är nödvändiga i avseende till kompetenser är baserad på en kvalitativ ansats.

The supply of uninterruptible power can be applied to many areas wherecontinuous operation is highly prioritized.The application of uninterruptible power for motor operation is facilitatedusing a frequency converter. Direct current operated frequency converters canbe applied directly to the power reserve which removes the need for additionalpower-converting.Batteries have long constituted the power reserve but advancements inthe development of ultracapacitors have created a viable substitution. Ultra-capacitors have high energy storing capabilities and can be applied to highpower applications.Maxwell is a leading manufacturing company of ultracapacitors and pro-vide different modules with built-in solutions for voltage balancing. Unevenvoltages between series-connected capacitors is a phenomenon caused by vary-ing capacitance. A configuration containing Maxwell?s 56V module is createdand constitutes the power reserve in the simulations.The discharge simulation shows a significant current that could damagethe system.

Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This report is the final result of the master thesis that have been done at  Sharpman Engineering. Sharpman Engineering is a small development and manufacturing company that produces and make drawings for everything from heavy duty log raft to aids for disabled people. The purpose have been to make one concept that make it easy for elderly and people having problem with knee- and back problem to stand up from a sitting position. The final result will the company have for further investigations and use for a pre-serial production with the goal to produce a new working product.To get an overview of what is on the market have a comprehensive survey has been done, followed by a survey on patent. This patent survey are for no intrusion on existing patents should occur and give new ideas.