Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

MSB stands for Swedish Civil Contingencies Agency. It?s a government organization that deals with emergencies and crises. MSB has developed a software package where the newest software version is called RIB 2012. The package includes the program RIB Karta.

Today there are a big need for a system that delivers overview of all available units for different municipalities and shipping- and security companies due to the increasing requirements for efficiency. The purpose with this graduation thesis is to find out which systems that is suitable to use while developing cost-effective software for positioning and to produce a prototype for such solution.This assignment has been done at the request of PocketMobile Communications AB. PocketMobile is a company that are specialized on delivering modern mobile software solutions and systems to companies with their own vehicle fleet or mobile workers.This master thesis can be split into two separate parts, the theoretic- and the practical part.The theoretic part includes producing a number of functional requirements in cooperation with PocketMobile and comparing the available systems against the function requirements.The practical part deal with the development of a prototype that demonstrates the software recommended. The development tools that best matched the functionality requirements when the selection was made in May 2007 were Map24 and OpenLayers. The system that was selected to use while developing the prototype was Map24, because this product matches all of the requirements and it is also suited for professional usage regarding support, scalability and reliability.

Syftet med denna undersökning har varit att utforska och förstå hur ledarskapet påverkas när en organisation genomgår en förändring till en agil verksamhet. Bakgrunden till undersökningen grundar sig i den traditionella synen på ledarskap där chefen ledde och fördelade arbetet. Under 1950-talet förändrades synen på arbetsledning och arbetsfördelning där medarbetarna blev allt mer delaktiga i arbetsprocessen.Med utgångspunkt i detta har vår forskning behandlat de effekter på ledarskapet som inträffar när en organisation går ifrån ?command and control? till ?empowerment?. Därav har vi ställt upp följande frågeställningar; Hur har kontrollen (över teamen) förändrats för linjechefen i övergången från Classic Waterfall till Agile, På vilket sätt har förändringen påverkat linjechefens informationshämtning till att genomföra IPM-samtal och Vilka effekter får förändringen på ledarstilen när organisationen övergår till en agil organisation.Vi har använt oss av en kvalitativ metod där åtta semistrukturerade intervjuer genomfördes med linjechefer ur två avdelningar för att samla in vårt empiriska material.

In a dynamic and unpredictable reality, either rigid structures or silo architectures areappropriate ways to organize an agile organization. This thesis enlightens these relationsbetween Service Oriented Architecture (SOA) and an organization who acts in a varied andconstantly changing business environment. In other words, this thesis enlightens the question:?How suitable is SOA to organize the enterprise who will meet a constantly changing andheterogenic business environment?.The thesis presents a model where an efficient organization must be agile to be able to actquickly in the business environments with constantly changing desires, needs, expectations,desires etc. According to the same model a Service Oriented Architecture organizes theenterprise elements such as processes, resources, competences, responsibilities, informationsystems etc.

Background: In recent research literature, some researchers mean that companies in fast changing markets have to act proactively while others find that companies have to adapt to conditions and to react. This makes it interesting to study how software companies act strategically and also to study to what extent a flexible organisation is required by companies who proact and by those who react. Purpose: The purpose of this thesis is the study how different types of software companies act strategically and what this requires of the company in terms of flexibility. Delimitation: The study treats only Swedish software companies with more than ten employees. Proceed of the Study: Representatives from four case companies as well as a consultant have been interviewed.

This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

In this paper we analyze a social network specifically designed for the elderly, people with Dementia and people with generally low computer experience. This is a relatively unexplored use for such software, and our goal is to find out whether the technique to be used is simple enough to use for the intended user group, and generally how the whole situation is experienced by the users. To achieve this we conducted an expert evaluation and interviewed a number of users at two separate occasions during their first weeks with Modernfamilies. We came to the conclusion that this software generally is simple enough to use for the intended target group. Some of the users we came in contact with experienced the software as a positive addition to their daily lives, while some could not see any reason for a further use.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.