The awareness regarding environmental issues is increasing and as a result a large number of products are eco-labeled. This enables the consumers to make enlightened environmental decisions when purchasing products. Eco-labeling is no longer for products only, but also for services like hotels. It?s difficult to determine what it actually means to eco-label a hotel and what kind of benefits it includes.

This bachelor thesis is intended to point out differences within the supervisors? role and contribute in making the role more attractive. At present the information about how the supervisors? perspective varies on the supervisors? role and the introduction to it depending on work experience and education is unknown. Further it was investigated why the supervisors? role is seen as an entrance to the building industry and how to develop the role to encourage the supervisors to stay longer within it.In the collection of data we have been interviewing supervisors and studying literature.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

The increased interest in a sustainable environment puts pressure on companies in the manufacturing industry. Rexcell Tissue & Airlaid AB (Rexcell) in Skåpafors produces paper to be converted into tabletop and hygiene products. Rexcell is certified according to the environmental management system ISO 14001, gaining competitive advantages by showing that the company works toward a sustainable environment and that they follow current legislation. The activities at the company are classified as hazardous to the environment according to the Environmental code. Every year, the activities are inspected by an independent inspector.

The Swedish government has a goal of achieving a fossil-free vehicle fleet in 2030. Heavy transport constitutes a significant part of Sweden's transportation sector and the vehicles are driven almost exclusively by fossil fuels. Siemens has developed eHighway, a concept for electric road systems enabling electrification of trucks, in order to reduce the environmental impact of heavy transports. This study aims to investigate the potential that eHighway has on transporting iron ore from the mine of Mertainen to a processing plant in Svappavaara. Electrified trucks are compared with conventional trucks, and diesel and electric trains.The evaluation was made with respect to energy consumption, environmental impact, and cost.

This study presents a holistic view of which factors small and medium-sized enterprises (SMEs) have to consider, in moving their customer order decoupling point (CODP) further from the customer, thereby becoming more customized. The study also investigate whether SMEs and larger enterprises differ in the strategic questions relating to what influences an enterprise to become more customized, which prerequisites are required and which problems enterprises should anticipate and prepare for. These questions are important, given that strategic change is challenging, and can take considerable time to accomplish; it therefore needs to be based on the right decisions. This study is motivated by the fact that the markets SMEs are selling to tend to become more and more complex and harder to anticipate. Increased globalisation and use of IT and ICT have lead to greater uncertainty in customer demand.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

The Circle is a strong form that influences the landscape. It also has symbolic value which influences our feelings and experiences. This Thesis project examines the Circles? characteristics and its significance in various connections. The goal of this Thesis is to examine what role the Circle plays in various situations and what motives there are for using it is landscape architecture. The basis for this Thesis work is a proposal which has been drawn up for development of the rural area between the villages of Hofterup and Löddeköping in the municipality of Kävlinge.

Since the 1st of May 2004 Cyprus is part of the European Union. The Republic of Cyprus as a whole is part of the Union, but all of the advantages of the Union membership cannot be enjoyed in all parts of the country. Since December 1963 the Cypriot administration has been separated into two, a Greek Cypriot and a Turkish Cypriot, and since 1974 the country is also territorially divided. The Greek Cypriot political administration is considered to be the legitimate representative of the Republic of Cyprus, the Turkish Cypriot administration is only recognised by Turkey. Since the disruption of the country in 1963 the UN has been trying to get the Cypriot parties to agree upon a peace solution in order to reunite the country.

The forests in the unique archipelago of the Baltic Sea is housing many and high values. For the resident population, which has a central role in sustaining a living archipelago, the forest can contribute to the outcome. The forest also contributes to turn the archipelago into one of Sweden?s most attractive recreational areas. Furthermore, these forests exhibit very high environmental values, and they are an element in the traditional cultural landscape.

The main purpose of this study is to examine differences and similarities concerning teamwork and interactive skills among preschool children while they interact with an Ipad respective a number of selected traditional artifacts. The traditional artifacts chosen for this study are small Lego blocks, JovoToys (click and construct system) and large puzzles. The study takes its starting point on the basis of both a social- and a learning perspective when different groups of preschool children in the ages from three to five years interact in fellowship groups with respective artifact. Primarily the main focus is to examine differences and similarities that appear from without the social perspective.The overall objective is to identify what eventual differences and similarities can be found purposely on both what is happening in the social interaction between the preschool children themselves but also what is taking place in the interaction between the children and each artifact. This study will also via theoretical frameworks create an understanding why eventual differences and similarities exist.The results are based on both a literature review and a field study.

During the last couple of years the focus for many businesses have moved from just being price oriented to include such factors as quality, flexibility, service, delivery precision and environmentally friendliness. The shift in viewpoint arises from the increasingly competition on the market and the hard economic atmosphere. It has become more important to differentiate the company and its products to be able to increase market share. The purpose with this master?s thesis was to get a better understanding on how companies (customer to DHL) are reasoning and prioritizing when choosing Swedish carriers.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.