There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

Horses respond individually to challenges, and the possibility to use these reactions to evaluate equine temperament with an objective instrument would have several advantages. Horse welfare could be improved by making it possible to find individuals best suited for a specific use, and understanding of the development of abnormal behaviours, such as stereotypies, could be increased. Management routines and training could be adjusted tosuit each individual horse and it could facilitate the selection of individuals appropriate for breeding. There are also economic implications, as horse buyers consider temperament important and after evaluating temperament, money can be spent solely on specific horses with all the right qualities. During the last decade, many attempts have been made to measure different aspects of temperament in horses, and the first aim of this project was to look at these studies and see which methods were used and which temperamental characteristics they measured.

The study was performed based on a qualitative method using a hermeneutical approach used to interpret the semi-structured interviews. The study aimed to investigate the Multisystemic therapy (MST) team in Halmstad municipality perceptions on the treatment method multisystemic therapy for youths from the ages of 12-18 years old.The questions were: Does the MST therapists experience that the MST is a method that leads to an improved situation for young people who receive the method? What do the MST therapists describe as opportunities and obstacles in the work with the method?The study builds on previous research on MST and empowerment based on MST. The study shows three therapists and an MST leader's experiences of the treatment and how it is aimed at influencing the parents and the youth for a change. From therapists statements it highlights how the MST method is designed for the young people?s motivation to change by means of the internal and external networks.

To effectively manage a forest resource for both economic and other values good planning is required. The problem is complex since you want to know which forest to cut and when. Often a hierarchical planning structure is applied, including strategic (long-term), tactical, (medium-term) and operational level. Today SCA Forest is one of few forestry companies in the northern Sweden with an integrated forest wood supply and industry. The goals of the company are to supply their own industries with wood and to manage the resources of the forest through a long-term perspective with satisfactory profitability.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Social media is a relatively new phenomenon that has had a huge impact in the way we communicate in recent years. Today it is used daily by almost everyone and has become a billion dollar industry where corporate existence is increasing by every day. But there is not entirely safe to work with social media since customers and visitors can make comments and investigate what others are writing about the brand and form their own opinion. The purpose of this study is to explain the potential advantages and disadvantages for organizations in vulnerable industries with a focus on insurance companies who works with Facebook. The paper takes its starting point in the convergence culture that explains a cultural shift where consumers are encouraged to search for new information and combine content from different media.

The survey describes a number of risks that Swedish farming companies are exposed to. The risk areas covered by the survey are currency risks, price risks and financial risks. The survey further describes why these risks have a great impact on the future development of the farming companies. The survey highlights the interrelation between the risks and the measures which can be used to minimize the risks, so-called financial instruments. The aim of the survey is to put focus on above mentioned risks and describe how these risks can be reduced to prevent the Swedish farming industry from stagnating in the future. The survey is a secondary survey whereby existing knowledge about risks and risk management is applied to farming companies. The written information on price risks and hedging is primarily derived from foreign sources.

Abstract New methods, techniques and tools for the building industry are constantly being developed and improved and launched on the market. The problem in the building industry development is not that the products are not good enough. The problem is instead that the existing construction companies do not choose to use these innovations, instead they continue to employ the technologies they already possess and master. This leads to the fact that the construction industry is, in the public eye, beeing seen as a conservative industry. AquaVilla is a company that basically produces houseboats.

Bachelor thesis in business administration with emphasis in accounting and auditing. Spring term 2011, Mälardalens Högskola.Authors:Jim Hansson, Filip Sahl and Pererik Sewerin.Advisor:Lennart Bogg.Key words:Abolition of mandatory auditing, optional audit, auditor, audit.Title:The role of audit in a credit review - impact from the creditor's perspectiveBackground:As of November 1st2010, auditing became optional for micro companies in Sweden. This leads to an opportunity for about 70 % of the joint-stock companies to choose whether or not to keep their auditors. Creditors are affected by this as they may receive a less trustworthy base to make a good credit review if many companies choose to proceed their accountings without the control of an auditor. Creditors have the option to require that companies are to be reviewed by auditors, while authorized accounting consultants may be a possible substitute as a quality control for the accountings.Purpose:The purpose of this thesis is to examine what impact optional audit has had in credit processes so far and look into alternative forms of reviews for businesses.Problem definition:? Does auditing simplify for the creditors in a credit review? ? Is there some kind of accounting that could be a substitute for the audit?Method:The study is qualitative in character through six interviews.

Since the Chinese economy?s reform in 1980, it has been attracting enormous foreign investments. Many Swedish firms from different sectors such as technology, manufactory production, consumer, service industries and so on, had started their investments in China. China has become the first choice for global manufacturing due to the huge market, continuous economic growth, stable political situation, sound investment environment and the WTO membership. In addition, China's enormous potential in finance, service, infrastructure, telecommunications, wholesales and retail industries will also attract a great deal of foreign capital.

More efficient energy consumption is essential to secure a sustainable future, not least within the building and real estate sector which answers for approximately 40 % of the EU countries total energy consumption. One part of EU: s work to reduce the energy consumption is the directive on energy performance of buildings which among other things have lead to stricter demands on energy performance in new and renovated buildings.One of the difficulties with making buildings more energy effective is that it often demands big investments and although it results in lower operating costs the extent of these savings and therefore also the repayment time can be difficult to decide beforehand. To make it interesting for property owners and also tenants to invest in energy efficient buildings powerful incentives are needed. Favorable loans to energy efficiency projects are one example of governmental instruments that have been tested in other European countries with good results.Reduced operating costs appear to be the main incentive for property owners to make their buildings more energy efficient. The best result of an energy efficiency project is usually achieved by cooperation between property owners and tenants but in order to make that interesting it is important that both parts can profit from the savings.