Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

In a phonological assessment, the aim is to obtain systematic and reliable data of a child's speech output, which can then serve as a basis for a decision on an appropriate intervention (Wolk & Meisler, 1998). Whether phonological assessment should be derived from an analysis of picture-naming or a conversation with the child, and whether the two methods for elicitation generate equivalent results, has been debated among clinicians and researchers for an extended time (Masterson, Bernhardt & Hofheintz, 2005).The aim of the present study was to compare two methods of speech elicitation for phonological assessment: spontaneous conversation and picture-naming, respectively. In the study, the procedures have been used when assessing children with phonological disorders as well as children with typical language development. The results are presented using two levels of phonological analysis; degree of phonological impairment, in terms of percentage of phonemes correct (PPC), and type of phonological impairment, in terms of phonological simplification processes. Eighteen (18) children participated in the study, nine (9) with phonological impairment (age 3;10 ? 5;11), and nine with typical phonologic development (age 3;2 ? 4;6).

This study is an initial attempt to investigate the relationship between banks and developers in Stockholm and its regions. It gives a good impression about the field of construction and project developments in terms of the finance and the negotiations associated with these types of projects. Main actors of the Stockholm?s construction financing market were of major interest for this study. On this regard, the relationships and ramifications of this group were investigated by using a qualitative and quantitative research method.

The report contains a survey on telecommuting in nature and how concepts around that information could look like. The client for the project is Lars Sandberg, Dotank AB in Karlstad. The project is implemented in the course Bachelor of Science in Innovation and Design, MSCG22 of the faculty of health, science and technology at Karlstad University in the spring of 2014.Working flexibly and remotely in the so-called knowledge based professions is growing. That nature is an important source of recovery is a fact. The literature search in this report shows that there are factors that create both physical and psychological stress on most office workers while nature is a source of recovery and inspiration.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

"? en utveckling som tillfredsställer dagens behov utan att äventyra kommande generationers möjligheter att tillfredsställa sina behov".Så definieras enligt Brundtlandkommissionen begreppet hållbar utveckling. Det handlar om att företag låter balansera ekonomiska, sociala och miljömässiga frågor i sin verksamhet. Tre ansvarsområden som på senare tid kommit att spela en allt mer betydande roll i såväl företag som samhälle. I Sverige lyder våra statligt ägda bolag under direktiv att redovisa sitt beaktande av ovanstående ansvarsområden i form av en hållbarhetsredovisning vilken dessutom ska kvalitetssäkras av oberoende tredje part.Studien syftar till att beskriva och förklara vilka upplevda fördelar ovanstående direktiv frambringar.

The purpose of this scientific essay is to evaluate if a continuous glucose monitoring system is something that can benefit Swedish animal health care. The study investigates if it is medically possible to use continuous glucose monitoring systems on dogs with an apparatus attached to their bodies. Furthermore, I try to establish whether this is possible in practice and how it could be done. The keywords used were diabetes mellitus, insulin, continuous glucose monitoring, blood glucose monitoring, dog, pet owner and animal nursing care. Furthermore, I wanted to find out if this system could be an alternative to currently established methods to measure the patient?s blood glucose level.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

In this report we compare the two programming languages PHP and C# in .Net. They are both used to create dynamic websites and on the web there's a debate going on about which of these languages you're recommended to use. With this report we want to make ourselves a more scientific base of which of these languages that is the most used language and which languages that are the most suitable for creating dynamic websites. We have two purposes with this report:1. To compare the usage of the programming languages C# in .Net and PHP at web agencies, advertising agencies and combinded agencies in Sweden today.2.

Sweden?s health care is continuously subjected to economical cutbacks, which results in enormous workloads. To prevent problems that arise in these situations, it is of great importance to take measures to increase the efficiency of the working process. This goal can be obtained by increasing our knowledge of the body, under both normal and sickly conditions. That is, by sharing knowledge of the various medical service units within Stockholm?s county council and thus elaborates diagnostics.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The purpose of this thesis is to show what advantages and opportunities social media offer for B2B-companies (business-to-business), and how they can be used for marketing communications.We have studied how companies can use social media, for example evolving the organization, developing products/services, staying up-to-date, building relations, creating customer loyalty and engagement, building the company?s identity and image, and affecting the buying decisions. We have also studied how B2B-companies can choose media channels, set goals, and measure the results.We have carried out interviews, through phone and visits, with four chosen companies that fit our criterias: Swedish B2B-company that is successful in social media.The result of the interviews show that B2B-companies use social media for various purposes, for example networking (to create and build long term relations with other companies) and to improve the company?s image among the end customers. Most of our interviewees reach their end customers (consumers) in first place and customers (companies) in second place, since many B2B-companies do not yet use social media.Half of our respondents mention that social media should not be used for advertising and campaigns (one way communication).

In advertising, the target has traditionally been aimed towards the product?s advantages.Today the trend is that the advertisers want to create a restless and unsatisfied consumer. Theconsumer on her part is not trying to achieve a goal with her consumption, but experiences theconsumption itself as a goal. Because of this the consumer demands a fast and variedselection.In order to sell their products the companies must create a non-existent need amongst theconsumers. Therefore it is very common in advertising today to use emotions instead ofinformation to attract the customers.