Purpose: The purpose of this study is to increase the understanding of how a bank?s features and internal factors have affected its choice of method in calculating the capital requirement.Theoretical and Empirical Method: The research strategy of this study has been of a qualitative nature with a deductive approach. The choice of method was depth interviews with respondents from a targeted sample of Swedish banks. These respondents were chosen based on the knowledge they possess as key employees in the capital requirement process and their involvement in choosing their banks? method for calculating the capital requirement.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The search for antibiotic compounds from the natural environment has been going on for seven decades, ever since penicillin entered the market and antibiotic treatments became routine. The evolutionary pressure put on the pathogenic microorganisms induced a rapid spreading of naturally occurring resistance genes, leaving only the option of finding new antibiotics to treat the resistant pathogens. Microorganisms have been extensively mined for their biosynthetic abilities to produce biologically active compounds. To date, more than 23 000 microbial natural products have been discovered. The Actinomycetales are ubiquitous bacteria that have been used for antibiotic discovery for more than half a century, and over 10 000 natural products have been identified from the order.

Syftet med detta arbete var att kartlägga inköparens behov vid implementeringsprocessen av ett nytt System på Klintberg & Way. Det framtida affärssystemet heter Microsoft Dynamics Navision 4.0. Till det nya affärssystemet ska även ett nytt IT-verktyg implementeras för att underlätta arbetet för inköparna. Detta logistikprogram heterAdvanced Forecasting & Procurement (AFP) ochär en tilläggsmodul till affärssystemet. Inköparna får med hjälp av AFP ett beställningsförslag på vilka lagerförda artiklar som ska beställas och hur stor kvantitet som ska beställas hem.Som metod valdes att studera befintliga arbetsprocesser på Klintberg & Way samt att delta i implementeringsprojektet på företaget.Jag valde att intervjua personer från inköp och personer som har någon anknytning till inköpsavdelningen som påverkar deras arbetsrutiner.

The goal of this thesis is to investigate the W3C Geolocation API from a developer?s perspective, focused on whether it makes development of location-based applications more accessible to developers. This has been investigated by looking at available ways to locate, possible uses, the functionality offered, the necessary level of prior knowledge needed for a developer and requirements on developer tools. This has been achieved through studies in relevant areas, a thorough introduction to W3C Geolocation API functionality, and by using the API to develop two different location-based applications as a demonstration. Testing of applications, on different platforms and in different environments, in conjunction with investigation of the rest of the material has shown that W3C Geolocation API in many ways actually makes development of location-based applications more accessible for developers. The API also provides fully adequate functionality and quality to meet the requirements for development of both simple and very advanced location-based applications. Målet med denna uppsats är att undersöka W3C Geolocation API ur ett utvecklarperspektiv, fokuserat på om den gör utveckling av positionsbaserade applikationer mer tillgänglig för utvecklare.

Purpose: The purpose of this study is to increase the understanding of how a bank?s features and internal factors have affected its choice of method in calculating the capital requirement.Theoretical and Empirical Method: The research strategy of this study has been of a qualitative nature with a deductive approach. The choice of method was depth interviews with respondents from a targeted sample of Swedish banks. These respondents were chosen based on the knowledge they possess as key employees in the capital requirement process and their involvement in choosing their banks? method for calculating the capital requirement.

When a car owner want to lock or unlock his or her car today, it?s preferable done by using aremote control. The system is really comfortable when the car owner is using the remote.A problem arises if a thief gets the remote.The thief doesn?t have to know where the car is parked, an approximate estimation where thecar is parked is enough.For instance, it?s enough to know which car park the car is parked in. If the thief knows that,he/she can repeatedly activate the remote control while looking for a car indicating with lightsand sounds.Because of the fact that a car usually indicates that it has been unlocked by making a shortsound indication, there will be no problem finding the car.The purpose with this project is to make a prototype which makes it harder for a thief to findthe car.

Essay in Political Science, Advanced Course, by Christoffer Hagström?The Bush Administration´s view on international cooperation and internationallaw and political-theoretical traditions influence on the administration´s foreignpolicy?Supervisor: Jan OlssonThe purpose of this paper is to analyze the American foreign policy, particularly with regard tointernational cooperation and international law. The two following research-questions are used inorder to fulfil the purpose: (1) what is the Bush-administrations´s view of of the place forinternational cooperation and international law in American foreign policy?, and (2) how does theadministration´s foreign policy correspond to dominant political-theoretical thought-traditions? Thetraditions used are: liberalism, realism and neoconservatism. The sources of the study mostlyinclude literature and policy-documents.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

Teamarbete och kommunikation är en utmaning för anestesisjuksköterskan. Vid akuta tillstånd omhändertas patienten enligt ABCDE som är hämtat från konceptet Advanced Trauma Life Support (ATLS) som är standard på skadeplatser och akutmottagningar i Sverige. Luftväg, andning och cirkulation utgör en del av anestesisjuksköterskans spetskompetens och anestesisjuksköterskan ska kunna medverka vid olyckor och i vården av svårt skadade personer. Forskning har visat att patienter kan dö till följd av dålig kommunikation mellan vårdarna. I kompetensbeskrivningen för anestesisjuksköterskor och under området säkerhet och vårdmiljö beskrivs vikten av tydlig kommunikation i förhållande till vårdteamet.

The cardiovascular system is one of the three major body systems. When an animal in a critical state arrives at the animal hospital, it is important to know the normal parameters in order to assess the patient?s cardiovascular status. Triage is a process where you considerate the patient?s condition instead of check in time, or other criteria.