The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

This work describes a series of glasses, both for people withvisual handicap, and the glasses are not only limited for use onlyby people with poor sight.I have, based on the course Senses, done research and lookedinto how to design glasses for visual handicapped people interms of function, look and expression.I have elaborated with several different glasses and performedmany experiments to come up with my final result, consisting ofa series of glasses.The glasses in the series are made with a weight on one side, onestep on the bottom to get the possibility for the glass to tilt over,which enables you to both hear and see when you have reach acertain amount of substance in the glass.It has also been important for me that the glasses express somethingand get an individual identity.The result became glasses for whiskey, coffee, shots and mullwine..

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This paper explores the theoretical and practical uses and limitations of battle-field archaeology. The author aims to paint a big picture of the subject of exca-vating, understanding and theorising about historical battlefields done every day by archaeologists. Its approach places much weight on a quantity of examples rather than exploring specific excavations in every detail, in an effort to give the reader an understanding about how battlefield archaeology works. It stresses the need for battlefield archaeology as a way of obtaining and securing impor-tant archaeological and historical information before it is lost to science. The author tries to evaluate the subject in a critical and pragmatic fashion in order to establish a clear understanding about the facts of battlefield archaeology..

Over the past few years the Swedish forestry industry has become increasing interested in direct seeding. Although, in practice, this interest has been restricted to pine seed, the knowledge and techniques that have been developed for pine seeding can readily be transferred to spruce. Direct seeding is a method that is of interest to the forestry industry since it can lead to lower regeneration costs, denser stands and better root development than the more conventional planting method. This study evaluated experiments that focused on direct seeding of spruce in the northern Sweden. Skogforsk set-up the experiments in Gideå and Sävar in 2003.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

This work is a literature review along with interviews from nine suckler herds. How to reducecalf mortality in the cow herd is the focus of this paper. To get profitability of a herd, it isimportant that you get a live calf per cow and year. Good fertility of the cows thus is veryimportant. During the years 2007 - 2008, approximately 5.5% of all calves born by beef cowsdied and about 8.5% of the calves born by heifers died.

The objective with this essay is to establish the benefits of inserting media as an obligatory topic in the upper secondary school. In order to succeed with this I will not only type this essay I will also produce a medial production in the form of a film.  I have interviewed two senior masters on Södertörns College where I have reviewed different questions that relate to the matter's weight in school values and the society. In the study I will also reflect over existing research within the area and to link these to the issue and those interviewed opinions. In the film I also present statistics within the communication technology's increase and an explanation how one obligatory topic becomes an obligatory topic..

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Coconut water as a rehydration fluid. - Can coconut water be recommended as a better choice than water or sports drink after moderately intense training?Author: My Green, Joakim LundSupervisor: Henriette PhilipsonExaminer: Frode SlindeProgram: Dietician study program, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 26th, 2014Background: Already in the 1960s an alternative to water as a rehydration fluid occurred, the so-called sports drink. Coconut water has in recent years been claimed as the "natural sports drink" in media. Coconut water is sold in shops and fitness centers around the world and has established itself as an alternative to water and sports drink in terms of rehydration after a workout.Objective: To investigate whether there is scientific evidence to recommend coconut water as a rehydration drink after moderately intense exercise ahead of water or sports drink.Search strategy: The search for articles in this systematic review was performed in the databases PubMed, Scopus, Cochrane and GUPEA.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

Health and fitness are two controversial and not easily defined topics that affect people in our modern society every day. We believe that we can find a link between individualism, globalization and the stress concerning weight and appearance ideals. Our bodies have turned into a popular subject for the media, and there is no indication that the interest will decline. As the world gets more artificial, "natural" ideals are getting more attention, such as the concept of a strong and healthy body. But there is also a downside, for example with health issues such as cardiovascular disease increasing following the birth of high-fat diets.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.