A renewed application for environmental permit for the Hovgården landfill in Uppsala shall be submitted before December 2004, therefore the municipality of Uppsala needs improved knowledge of the contents, mostly organic compounds in the leachate and they also want to find a method to minimize the emissions of these compounds. The purpose of this study was to find a practical and economical method based on chemical oxidation using oxidants. The oxidants investigated are Fenton's reagent, hydrogen peroxide, Oxypro, potassium permanganate and potassium persulfate. The study was made on untreated leachate and leachate that has been treated in an aerated dam followed by sedimentation dams collected from the Hovgården landfill, and alson on sludge water from sludge storage cells. The effects of the five oxidants have been established by analysing the UV absorbance at the wavelengths 253,7 nm and 260,0 nm at different pH values. The UV absorbance was used to indicate the amount of aromatic hydrocarbons in the water. Also analyses of iron and manganese were done after the experiments with potassium permanganate, hydrogen peroxide and Fenton's reagent.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Today's society is facing major challenges. In order to reduce the climate impact fossil fuels should be replaced with fuels that do not contribute to the greenhouse effect. The growing population generates organic waste originating from industry and households so called organic fraction of municipal solid waste (OFMSW). Through anaerobic digestion, waste can be utilized to produce energy-rich methane gas. In this way, waste can be a resource instead of a burden on society.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

This study has focused on testing the following two hypotheses:? Pest resistant plants have higher levels and/or several different kinds of secondary metabolites. ? Induced defensive systems in resistant plants are activated more rapidly than those of susceptible plants. As a background for the test of the hypotheses a short literature study was performed concerning plant defensive mechanisms in Arabidopsis thaliana.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

This study is one of five that has been done based on Lunds Energi?s planned investment in bioenergy. The plan is to build two large burners, at Örtofta, that?s going to be supplied with biofuels. In this study I take a closer look on the profitability when you choose to sell your cereal as bioenergy. I?ve been calculating with selling the straw from the grain crops and winter rape, selling the rye weat as whole crop and fertilize the hemp with sewage sludge.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

Aluminium sulphate (Al2(SO4)3) is usually added during the drinking water treatment processin order to precipitate organic and inorganic material, resulting in aluminium-based drinkingwater treatment residual sludge (WTR). Since 2003 Swedish law no longer permits WTR tobe deposited in lakes, and there is an interest to explore the possibility to utilize WTR as soilamendment. The aim of this study was to examine the effects of WTR application on cropgrowth and concentrations of macronutrients and trace elements (including micronutrients andpotential toxic elements). A greenhouse pot experiment was conducted with three soils; a clayloam rich in phosphorous (P), a loamy sand rich in P, and a silty loam with a low soil Pconcentration, and two crop species Italian ryegrass (Lolium multiflorum Lam. cv.

Due to the attention of several escapes, rescue attempts and hostage situations from Swedish prisons during the year of 2004 a debate about correctional system and safety arose. It resulted in official reports and proposals to improve the safety of the institutions. The incidents of 2004 will most likely have an effect on the discourse of the correctional system. The purpose with this study is to analyse which discourses that today can be distinguished in the correctional system and thereby will be the foundation of the correctional systemof tomorrow. The method used to answer the purpose of the study is a Foucauldian based discourse analysis.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.