This work aims to obtain information on diurnal variations of aerosol concentrations in thecity of Lund (Sweden) and trying to locate the origin of the aerosols long distance transports.The study shows that the aerosol concentrations varied quit strongly over the entiremeasurement period, reflecting air masses of different degrees of pollution, mainly as a resultof the diurnal rhythm of the traffics. Trajectories reveals that air masses originated inSoutheastern and Eastern Europe contains higher aerosol concentrations compared to other airmasses..

För företag som arbetar med måttlistor och skisser och låter mönstret skapas på en fabrik kan det vara problematiskt att få plaggen att sitta som man vill. Speciellt svårt kan det vara med ärmhål, ärmkullar och halshål. Jag har arbetat med ett sådant företag för att ta fram en kappa och klänning från designskisser i sextiotalsstil med modern passform i storlekarna XS-XL. Moderniseringen innebär till exempel mer rörelsevidd, inte spetsig byst och längre ärmar. Till detta skapas plaggmåttlistor, materialspecifikationer och plaggdelsdokument för att plaggen ska vara färdigt för att produceras på fabrik.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital.

AbstractTitle:The Impact of Management Control Systems on the Purchaser Function - A study of Scania and Sandvik Authors: Mohammad Reza Akhbari and Johanna Sullivan Svensson Published: 2011 Keywords: Management control, purchasing function, impact, control, control instruments, Key Performance Indicators, measurement, communication and organizational structure. Background and problem formulation: In order for a company?s business idea or vision to be fulfilled, the management of a company needs assistance from various means to intentionally affect the operation in the desired direction. Management control concerns activities of both financial and non-financial character in order to implement the strategy of a company and to reach profitability. Since the purchaser function is responsible of spending 50 percent of a company?s total revenue, the function has an optimal starting point to be a key actor in the shaping and execution of a company?s strategic plan.

Fält Elektronik AB i Kalix utvecklar och tillverkar bland annat larmsändare för fast uppkopplade larmnät. Fast uppkopplade larmnät används för att åstadkomma övervakad och säker överföring av larm och annan information mellan tekniska system för skydd och säkerhet. Larmöverföringen är ständigt övervakad från larmanläggningen ända fram till larmcentralen. Ett problem som idag finns i larmnät är att om man tappar kontakten med en larmsändare så vet man bara att man tappat kontakten, men inte varför. Därför vill man nu utveckla ett instrument som kan mäta och kontrollera vad som orsakar att uppkopplingen bryts t.ex.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.