
Sökresultat:
68 Uppsatser om Acoustic Spectroscopy - Sida 3 av 5
Bröd vid död i Kalvshälla : Analys av förhistoriskt organiskt grav- och boplatsmaterial från Barkarby i Järfälla socken, Uppland
This paper deals with prehistoric charred organic material, interpreted as bread, found in graves and in the underlying settlement at Kalvshälla, Järfälla parish in Uppland. The aim was to categorize the organic material morphologically and with the help of Fourier transformed Infrared spectroscopy (FT-IR) to see whether it was bread or not. Material from 13 graves (dated to Late Roman Iron Age until Viking Age) and 3 finds from the settlement have been analysed. Differences were noted both in shape, porosity and structure. Some of the material has been interpreted as cereal based foodstuff instead of bread due to morphological discrepancies.
Normering av nasaleringsvärden uppmätta med nasometer hos barn i fyra- till femårsåldern i Linköping
The Nasometer is a non-invasive acoustic measuring instrument that quantifies the ratio ofnasal resonance in speech. It can be used as a complement to perceptual judgment of speech impediments, for example, in patients with cleft palate and velopharyngeal insufficiency. Inorder to determine if a nasalance score is abnormal, it must be compared to norm data. The main purpose of the study was to collect reference nasalance scores in children between fourand five years of age in Linköping. An additional objective was to compare the results tonorm data collected in Umeå.
Kv. Tvättstugan, ett flerbostadshus med massiv trästomme : Ett examensarbete om akustik- och brandkrav samt en jämförelse av energi- och fuktaspekter
Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.
Röst och hörselnedsättning : Akustisk analys av röst hos sju hörapparatsanvändare
A number of studies have been made to examine several aspects of voice production in individuals with different types of hearing impairments. Most of the studies were made to explore the impact that hearing aids have for people with severe or congenital hearing impairment. So far it has been confirmed that there are changes regarding voice production in these individuals. A group that has not been investigated regarding voice production to a larger extent are hearing aid users with an acquired hearing impairment. In the present study the voice production of seven individuals, four men and three women, with a moderate acquired hearing impairment is examined.
Ersättande av tioglykolsyra Utredning för att se ifall tioglykolsyra går att ersätta som nedbrytande kemikalie vid analys av järnhaltiga prover
Denna rapport behandlar en undersökning vars syfte var att finna en ersättande kemikalie ellermetod till den nu använda metoden för att bryta ner magnetitpartiklar i ett vattenprov för attanalysera dess järnhalt. I den nuvarande metoden används tioglykolsyra för att lösa uppmagnetiten innan analys i ICP-MS (induktivt kopplat plasma ? masspektrometer).Tioglykolsyra är giftig och dessutom påfrestande för analysinstrumenten och därmed inteönskvärd. Försöken i denna utredning utfördes genom att byta ut tioglykolsyran mot saltsyra,svavelsyra eller EDTA, samt att ändra temperatur eller tid i uppvärmning av provet.Utredningen visade att saltsyra inte är en fungerande ersättande kemikalie, att svavelsyramöjligen kan fungera, även om vidare utredning krävs för att finna de optimala förhållandenamellan tid, temperatur och koncentration av syran, samt att EDTA kanske också kan fungera.Utredningen visade även att istället för att analysera i en ICP-MS verkade det som att detskulle kunna fungera att analysera färskvattenprover (prover utan förbehandling) i en AAS(atomabsorptionsspektrometer) med grafitugn. För att veta med säkerhet ifall tioglykolsyragår att ersätta behövs vidare utredning för AAS med grafitugn, svavelsyra och EDTA.
Butorfanol till get : farmakokinetik efter subkutan injektion
Today there are no analgesic drugs approved to be used in goats. Drugs approved for use in other species are consequently being used without knowing the pharmacokinetics of these drugs in goats. The purpose of this study was to investigate the pharmacokinetics of the opioid butorphanol when given subcutaneously in goats. Subcutaneous administration might extend the half-life compared to intravenous or intramuscular administration. Eight clinically healthy, non-pregnant 6 months old female goats were used.
Automatisk Identifiering av Inandningspauser i Spontant Tal - ett HMM/ANN-hybridsystem i Matlab
This thesis presents a system which has been implemented to satisfy a need in theresearch on how speech planning interacts with syntactic and prosodic structure inspontaneous speech. The long-term purpose of the research is to provide models forautomatic parsing of spontaneous speech and for psycholinguistical modelling of speechproduction. Identification of inhalation pauses is an important step in the developmentof automatic methods for spontaneous speech parsing.Identification of inhalation pauses is considered to be a keyword-spotting speechrecognition problem. Hybrid HMM(Hidden Markov Models)/ANN(Artificial NeuralNetworks) approach is applied to this problem. Method gets 90,8% in Recall, 66,4% inPrecision and 76,7% in F-score.
Insatsens akustik och dess påverkan på hörapparatens förstärkning
The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.
Syntes och egenskapskarakterisering av volframoxid framställd med magnetronsputtring
The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.
Oförstörande provning in-line : Säkerställande av produktionskvalitén vid gjutning av cylinderhuvuden
För att unvika onödiga kassationer inom fordonsindustrin satsas det mycket på att få fram ?rätt kvalité? på komponenterna från början. Dagens metod är slumpmässiga förstörande tester där endast ett fåtal komponenter testas och förstörs. Denna metod blir dyr i längden på grund av att produkten förstörs och det går inte att följa upp med ytterligare analyser. Porer och inneslutningar vid gjutningen av cylinderhuvud och är ett vanligt problem i fordonsindutrin och när inte varje komponent kan testas och kvalitetssäkras på ett snabbt och effektivt sätt generar det kostnader i både tid och pengar.Målet med detta examensarbete var att utreda om RAM (Resonant Acoustic Method) kan upptäcka dessa porer och inneslutningar med en storlek mellan 1?5 mm i cylinderhuvud från Scania och även undersöka om RAM kan sättas in direkt i produktionslinorna.Med RAM gjordes fem tester per objekt med tre stycken mikrofonpositioner och tre stycken excitationspunkter och med en upplösning på 1,5 Hz.
Registreringsmetoder för initial och avancerad dental erosion : Litteraturstudie
Introduktion: Dental erosion definieras som förlust av tandens hårdvävnad genom en kemisk process som inte involverar bakterier. Dagens förändrade livsstil och kosthållning medför att våra tänder oftare utsätts för kemisk påverkan som kan leda till erosion. Det är flera faktorer som samverkar och dental erosion har en multifaktoriell etiologi.Syfte: Syftet är att beskriva olika registreringsmetoder för dental erosion.Frågeställningar: Vilka metoder kan användas för registrering av initial erosion? Vilka metoder kan användas för registrering av avancerad erosionsskada? Vilka metoder är kliniskt beprövade på patient?Metod: LitteraturstudieResultat: Ett flertal registreringsmetoder fanns beskrivna i litteraturen, merparten var inte applicerbara kliniskt. Registeringsmetoderna som framgick i den beskrivande litteraturstudien var: 3D scanning microscope (IFM), Atomic absorption spectroscopy (AAS), Digital photography (DP), Focus-variation 3D microscopy (FVM), Longitudinal microradiography (LMR), Non-contact confocal laser scanning microscopy (CLSM), Optical assessment, Optical profilometry (OP), Quantitative light-induced fluorescence (QLF), Scanning electron microscopy (SEM), Stylus profilometry (SP), Ultrasound, White light interferometry (WLI) och X-ray diffraction (XRD).Konklusion: Vid registrering av initial erosion krävs analys av tandytans mineralinnehåll samt optiska analyser med hjälp av instrument.
Produktion och perception av ordaccenter hos femåriga östgötska barn med typisk språkutveckling
The Swedish language contains contrasts of tonal word accents, realized by change in the F0 contour. Contrasts of word accents require at least two syllables with stress on the first syllable of the word or a stressed syllable followed by a non-stressed.The purpose of the present study was to examine how five-year-old children living in Östergötland with typical language development produce and discriminate tonal word accents. In addition, it was investigated how these abilities affect each other and comparisons were made to a similar study on children living in Skåne.For elicitation of tonal word accents a set of pictures with contrastive tonal word accents was used. The children were recorded and their answers were evaluated by visual classification of their F0-curves. In a perceptual analysis of the children?s productions, 11 linguistically naive listeners evaluated 44 randomized words from the recordings.
DETEKTERA MERA! : - En studie av LigandTracer® och andra vanliga detektionstekniker för interaktion inom antikroppsutveckling
Ridgeview Instruments AB är ett företag, med säte i Uppsala, som bland annat utvecklar mjukvara för detektionsanalys och detektionsinstrumenten LigandTracer®. Instrumenten detekterar cellinteraktioner i realtid och tillhandahåller information om hur interaktion mellan undersökt ligand och receptor sker. LigandTracer® används bland annat vid cancerstudier och affinitetsstudier av antikroppsinbindning till antigener på celler. LigandTracer® och teknologin bakom den har studerats för att hitta de främsta styrkorna samt utvecklingsområden i jämförelse med andra detektionstekniker. Dessa tekniker är surface plasmon resonance, BioLayer Interferometry, quartz crystal microbalance samt surface acoustic wave. Främsta styrkan hos detektion med LigandTracer® är att stor mängd data som beskriver interaktionerna erhålls.
Utformning & placering av vädringskanaler i ett passivhus, drivet av naturliga krafter
A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.
INFÄSTNING AV LED-ARMATUR
The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.