This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

Today significant resources are provided to improve the digital work environment within the Swedish healthcare to create efficiency, good work environment and patient safety. Despite this, major flaws are shown by the lack of communication between the eHealthcare systems. This becomes a stress factor among healthcare professionals because of increased administration and decreased physical contact with patients. The purpose of this study is to create a understanding of the concept of interoperability at different levels in the eHealthcare systems. This has been conducted through a qualitative interview study at a healthcare center where the respondents have been describing their digital work environment and the way it works today.

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

This thesis presents a comparative study of image registration at two picture collection libraries. The two registration systems are analyzed as to the theoretical principles behind them and their practical application, and related to theoretical tools for subject analysis and bibliographic standards. While a growing number of picture collections now digitize their material, generally accepted standards and methods for the registration of digital images are still lacking. Many different systems coexist, often developed in-house in response to ad hoc needs and based on traditional registration tools created for textual documents, resulting in internationally incompatible mixed-format systems. The two picture collections examined here, however, have opted for similar, standardized tools for registration and subject analysis, and while there are differences in their application and focus, they have both considered issues of cross-system compatibility.

As the information society becomes increasingly flooded with digital images, the need for efficient image retrieval systems increases as well. To handle the vast amounts of data involved, the indexing process needs to be run automatically, using content-based descriptors extracted directly from the digital image, such as colour composition, shape and texture features. These content-based image retrieval systems are often slow and cumbersome, and can appear confusing to an ordinary user who does not understand the underlying mechanisms. One step towards more efficient and user-friendly retrieval systems might be to adjust the weight placed on various descriptors depending on which image category is being searched for. The results of this thesis show that certain categories of digital images would benefit from having extra weight assigned to colour, texture or shape features when searching for images of that category..

Kandidatuppsats i kulturgeografi och geografi med kulturgeografisk inriktning.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Companies today need to be more focused than ever on having an active Human Resource Management culture. This is not only because of the companies? concern for their staffs wellbeing, but for the companies? effectiveness in the long run. The reward systems which many corporations use today, to both keep their employees and attract new ones, is a well researched subject by scholars as well as journalists. Earlier research has suggested that it is important to implement an active Human Resource Strategy.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

Bakgrund och problem: Enligt IFRS Föreställningsram är Årsredovisningens huvudsakliga intressentinvesterare. För att attrahera riskkapital från investerare är det angeläget att bolagets finansiellaställning är god. Detta kan skapa incitament för bolaget att anpassa sin finansiella ställning för attmöta investerares krav. För att uppnå detta kan bolag använda sig av olika redovisningstekniskametoder, beroende på hur årsredovisningen skall framställas. Merparten av dessa metoder, vilkasyftar till att framställa den ekonomiska ställningen som bättre än verkligheten, går underbenämningen Designad redovisning, där Big Bath Accounting ingår som en del.Syfte: Studiens syfte är att undersöka om det finns statistiska belägg för tillämpning av den teoretiskadefinitionen av strategin Big Bath Accounting på NASDAQ OMX Stockholmsbörsens Large Cap.Avgränsningar: Studien avgränsar sig till att undersöka företag, som per 2009-04-01 fanns noteradepå NASDAQ OMX Stockholmsbörsens Large Cap.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

Background: At the turn of the year 2004/2005, IAS 19 replaced Tryggandelagen (TrL) and RR 29 as the accounting standard in Swedish concerns. This introduction was associated with a certain apprehension for the possible changes in the companies? pension liabilities and equity.Purpose: To illustrate the difficulties of the introduction of IAS 19 by observing how it differs from TrL, and what kind of problems these differences can cause.Procedure: Individuals who are well up in, and work with pension liabilities have been interviewed. After this follows an example of the calculated pension liability of a company, to illustrate the differences between the calculations according to TrL and IAS 19. To conclude the chapter, a comparison between a number of companies from the Stockholm stock exchange is made to establish their various actuarial assumptions.Method: The essay mainly follows the qualitative research method, since this method is more appropriate when the substance in the matter is based on detailed differences and opinions.Results and conclusions: The introduction of IAS 19 has taken time and been an expensive matter, although the expenses weren?t as great as feared.

Objective: The aim of this paper is to see if there are higher restructuring expenses under the item provision for the first year when a new president takes office.Method: The study was done by a quantitative study. Financial statements have been examined for companies listed on the OMX Stockholm Stock Exchange, Large Cap. We have examined all the companies? annual reports between the years 2002-2008. We have looked at the experience of restructuring and other expenses that occur in the context of CEO change.

In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.