Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The aim of the work was to compare fuel consumption during work in practical field conditions with a standardized method developed by Skogforsk (The Forestry Research Institute of Sweden), (Brunberg, 2005) for harvesters and forwarders from different manufacturers and of different sizes in order to promote the development of more fuel efficient machines. Two studies were carried out. - Statistics of fuel consumption were collected. - An inquiry was sent out in order to get more detailed information of different aspects influencing the fuel consumption. The studied machines were divided into two classes, large machines (> 150 kW), and average size machines (100 ? 150 kW), and of the manufacturer Timberjack and Valmet. Our results shows a 15 % lower fuel consumption for average size harvesters and an 8 % higher fuel consumption for large harvesters compared with Skogforsks model.

Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

In 2010, SAS received the "On time performance service" award by Flightstats. This award was an affirmation of long-term work, both in projects and as an ongoing process, which the company sought to systematically improve punctuality on its flights. The extent to which SAS followed the values and the underlying theories of the cornerstone model for total quality management was the main issue in this essay. Whether there are conditions for the company to get even further by working in other ways was also investigated. In addition, the importance of punctuality in relation to customer satisfaction was discussed.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

In this paper Swedish hedge funds and strategies are discussed and analysed. These new financial forms seem to draw recently a huge attention both in media, press and the academic world. The fact is that hedge funds have existed already for a long time but it is still known too little about them. After the introduction of hedge funds, different asset pricing models are discussed including the most basic of all ? CAPM and further Fama and French three factor model as well as the expanding model with conditioning approach.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

Resultaten visar på att abnormal earnings model är en mertillförlitlig modell i förhållande till dividend growth model. Dettafrämst då abnormal earnings model grundar sig på mer tillgängliginformation samt att tillväxträntan i dividend growth model harkonstaterats vara orealistiskt hög. Analytikers prognoser tenderaratt vara optimistiska i början av undersökningsperioden 2000-2002. Perioden 2003-2007 präglas mer av pessimistiskavinstprognoser. Marknadens riskpremie fluktuerar mindre underperioden 2005-2007, vilket kan förklaras utav införandet av IFRSår 2005..

The study aims to understand the underlying factor why McDonald's customers return despiteprevious failure customer experiences. Why do customers come back to the company thatcontributes to the former dissatisfaction? McDonald's attempt to maintain unceasingpurposeful emergence fail at the local level, where the customer contact occurs. McDonald'sofferings and customers' bounded rationality results in that customers are satisfied with an"ok" experience, which adds to their low expectations of McDonalds. This makes clear thatMcDonald's does not have to make an effort through constant adaptation at the local level toachieve a "great" level of satisfaction.

AbstractTitle: The effect of caffeine on performance during resistance training ?A systematic overviewAuthor: Amanda Jonsson and Erica BenderSupervisor: Mette AxelsenExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2015-03-31Background: Products with high content of caffeine has in recent years become popular for optimizing physical performance. Caffeine affects mechanisms in our body which can be beneficial to perform better during exercise, but the theories have not yet been systematically reviewed.Objective: The purpose of this review article, is to examine the acute effect of caffeine intake before strength training on athletic performance with the outcome muscle endurance.Search strategy: A systematic literature search in databases PubMed, Scopus and Cochrane using keywords: ?Caffeine?, ?strength?, ?muscle?, "resistance training", "muscle strength", "strength training", "athletic performance", ?repetitions to failure?, ?muscular endurance? and ?endurance training?.Selection criteria: Healthy subjects, 16-50 years old, with experience in strength training. Studies with a caffeine intake > 5 mg/kg body weight, which participants performed dynamic strength exercises on a weight > 60% of their 1 RM.

Riskanalysverktyget failure mode and effects analysis (FMEA) som analyserar kompo-nenter och signaler är beroende av att designen av fordonets elsystem finns tillgängligt och utförs därför sent i utvecklingsprocessen av elsystem. Detta medför att vissa fel inte analyseras i tid och kanske måste designas bort i efterhand vilket kan leda till ökad sy-stemkomplexitet samt längre och dyrare utvecklingsprocesser.Målet med examensarbetet är att genom en litteraturstudie ta reda på om det finns me-toder eller arbetssätt som gör att Scania tidigt i utvecklingsprocessen av elsystem kan genomföra funktionsanalyser i sitt riskanalysarbete med FMEA samt analysera dessa.Resultatet av detta examensarbete visar att det är möjligt att påbörja FMEA-arbetet tidigt i utvecklingsprocessen av elsystem om ingenjörerna utgår från ett funktionsperspektiv i riskanalysarbetet där de listar och rangordnar de funktioner som tillsammans realiserar en eller flera funktionaliteter samt deras felmoder, feleffekter, feldetektering, allvarlighet, sannolikhet och frekvens. Med hjälp av en FFMEA kan ingenjörerna tidigt i utveck-lingsprocessen av elsystem snabbt och effektivt hantera de identifierade säkerhetskritiska funktionerna.En befintlig funktionalitet på Scania har brutits ned i funktioner och en FFMEA har genomförts på dessa som en demonstration på hur en FFMEA kan genomföras och se ut..

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.