Efficient energy use in restaurantsUmeå Municipality wishes to combine energy issues with food control, and thus help restaurants to become more energy efficient. During March and April 2010, I visited seven restaurants and interviewed restaurant personnel about current state and application of kitchen appliances, using a checklist to make sure that the same questions were asked at all restaurants. The restaurants were all different sizes and offered different kinds of food. The study mostly focuses on energy efficiency by behaviour and not on location or technology. Almost every restaurant that was visited had the potential to improve in one or more areas, such as kitchen appliances, lamps and lighting fixtures, heating, cooling and ventilation.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Netadmin Systems är ett Linköpingsbaserat IT-företag där huvudprodukten NETadmin är ett Operation support system/Business support system (OSS/BSS) som i huvudsak används i öppna nät för bl.a. kund- och lagerhantering, provisionering, övervakning och ärendehantering. Ett växande behov finns att göra det möjligt att använda övervakningssystemet via mobila enheter för att kunna felsöka och hantera driftstörningar effektivt.Syftet med rapporten är att undersöka hur övervakningssystemet kan göras tillgängligt på Android samt att ta fram en prototypapplikation för hantering av grundläggande övervakning. Genom fallstudien som har genomförts har slutsatsen dragits att Netadmin API är lämpligt för kommunikation via mobila enheter men att API behöver vidareutvecklas med ytterligarefunktioner. De viktigaste av dessa har implementerats och arbetet har även mynnat ut i en applikationsprototyp för Android.Genom utvecklingen av denna applikation ges Netadmins kunder möjlighet att hantera övervakningssystemet via mobila enheter..

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The Swedish government has introduced a goal to reduce the energy intensity by 20% to the year 2020. To reach this goal actions need to be taken throughout the energy sector which includes residential and commercial buildings. This thesis considers the possibility to reduce the energy usage in a building located close to Uppsala. The analyzed building is a combined office, cafeteria and entrance and was completed about half a year before this project started. Therefore the measures presented for a more energy efficient building are presented as measures for future constructions.Simulations have been made in VIP-Energy, a dynamic energy calculation program.

The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Magnesium is one of the most important minerals in the body and it participates in many essential processes, such as energy metabolism and protein synthezis. Magnesium deficiency in cattle may occur when they are let out for pasture in the spring, and is associated with tetany, known as grass staggers. A high yielding dairy cow often loses more magnesium daily in the milk than she has available in the body, and magnesium thereby needs to be provided in the feed to prevent the cow from being affected by deficiency symptoms. The uptake of magnesium is mainly located to the rumen and is not regulated by hormones. The surplus is excreted in the urine by the kidneys.

Energy supply in Sweden year 2011 amounted to 577 TWh. The final energy consumption for industrial, residential and service was 379 TWh. Sweden has energy policy goals to reduce energy use in buildings. One of these goals is to reduce the energy use by 20 % in 2020 compared to the year 1995. An important step to achieve this goal is to target energy efficiency measures in existing buildings.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.