In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

The purpose of this paper is to examine the three main translation methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The methods discussed in this paper may well be improved, or perhaps replaced by others in the future..

SammanfattningDet finns tre anledningar till att uppsatsen kom att handla om biogas. Göteborg Energi AB som vi samarbetat med under vårt examensår, hade ett behov av att kartlägga hur effektiva deras biogasanläggningar var. Samt vårt intresse för biogas som bygger på ett stort engagemang kring förnybarenergi, och att branschen spås en lika expansiv utveckling som vindkraften haft det senaste decenniet.Syftet med uppsatsen är att defininera och utveckla relevanta nyckeltal. Vi kommer sedan att samla in data från utvalda biogasanläggningar, för att sedan sammanställa och analysera denna. Frågan vi vill besvara är hur de olika biogasanläggningarna och produktionsmetoderna skiljer sig åt beträffande hur effektiva de är ur energi- och kostnadssynpunkt samt ur ett lönsamhetsperspektiv?För att besvara forskningsfrågan har vi skapat en modell där relationen mellan de olika nyckeltalen illustreras och förklaras, för att skapa förståelse för sambandet mellan intäktsdrivande och kostnadsdrivande produktionsfaktorer.

Who runs the development? A comparative study of the construction of residential buildings in Nacka and Södertälje.The aim of this study is to identify actors involved in the initiation and implementation of residential house construction in two Swedish municipalities. This means who is taking initiative for new residential buildings, who affects the planning process, who finances these new buildings and who builds them. By exploring empiric material from the municipalities of Nacka and Södertälje, the above questions will be answered and by referring to pluralism, growth machine theory and regime theory a link to general theories of political science is made. The results found show that the analysed municipalities have quite different possibilities for acting and that these backgrounds are also important for which actors will take initiative for new residential buildings and which actors will be allowed to state their opinion during the planning process.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis presents the results of the implementation and evaluation of two machine learning algorithms [Baz98, GB97]based on notions from Rough Set theory [Paw82]. Both algorithms were implemented and tested using the Weka [WF00]software framework. The main purpose for doing this was to investigate whether the experimental results obtained in [Baz98]could be reproduced, by implementing both algorithms in a framework that provided common functionalities needed by both. As a result of this thesis, a Rough Set framework accompanying the Weka system was designed and implemented, as well as three methods for discretization and three classi cation methods. The results of the evaluation did not match those obtained by the original authors.

Vattenfall Heat AB is a district heat provider in Drefviken, but has yet to establish any cooling systems in this area. This thesis examines the potential client base within the area today and over the coming 20 years. The feasibility of the most common cooling technologies is evaluated and results show a total potential for an installed capacity of 30 MW providing 50 GWh of cooling per year. One of the examined areas shows good prospect for heat driven absorption chillers during the summer months when the heat load is limited..

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.