The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.The project has been made in collaboration with the company Husqvarna, which is one of the biggest actors dealing with garden machinery on the market. Together we determined the project goal, ?To invent, construct and test a brand new concept for how an automatic trimmerhead can look and function?.At this day there are several different automatic trimmerheads on the market, both semi and fully automatic.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

This study is based on AgroSeas business idea from environmental problems to valuable resource, with the objective to optimize a method to purify the already eutrophicated Baltic Sea by harvesting water plants, mainly reed. The nutrients will then be recirculated to arable land through residues from biogas production. The amount of nutrients that can be removed by harvesting the biomass depends on the amounts of biomass and the nutrient content of it, which in turn is strongly dependent on the nutrient concentration of the surrounding water. Vegetation suggested in the study for an effective nutrient uptake is helophytes: reed, cattails, reed canary grass, reed sweet grass in shallower water and lemnoideaes: duckweed and nymphaeids in the deeper parts. Competitive species has high purification ability but requires regular maintenance to avoid channeling and overgrowth. Regarding time and method of harvest, effectiveness may be improved by: harvesting plants above the water level and after flowering, a border is kept, harvesting twice a season, a bigger machine and a regular maintenance. This literature has illuminated a major environmental problem and it has been suggested optimizations for a method for cleaning the Baltic Sea through harvesting water plants, but to get a definite answer for the optimal method for each site tests should be carried out, this because many factors determine to what is suitable for each, specific environment. .

AimThe main aim of the study was to investigate the difference in bilateral deficit between rowers and sprinters during maximal eccentric/concentric muscle actions.? Are there any significant differences in bilateral deficit between rowers and sprinters?? Do the amount of years in practice effect the bilateral deficit?MethodFourteen male subject participants divided in 2 equal sized groups (7 individuals in each group; rowers and sprinters) performed maximal unilateral/bilateral eccentric and concentric muscle actions in a leg press machine at a velocity of 0.2m/s. The range of motion in the knee joint was 70° ? 140°. Dependent t-tests have been performed within each group pre and post test.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Beacon AB has been producing Gobos for some time. A Gobo is a small round sheet used in projectors almost like a slide. It is used mostly in the commercial and entertainment business. Today these Gobos are created by using a film (also called mask). A digital exposure machine called LIOS has been developed to make it possible to create Gobos using direct exposure.

I mitten av 1990-talet närmare bestämt 1996 gjordes en film kallad Diary of a Camper. Filmen handlade om en person som satt och lurpassade på sina fiender i ett datorspel. Det som var speciellt med denna film var inte handlingen eller något fantastiskt kameraarbete. Nej det som var speciellt var det faktum att filmen spelades in i ett datorspel. Denna film anses vara startskottet för machinimakulturen som idag omfattar flera tusen utövare världen över.Det var personerna bakom Diary of a camper som myntade uttrycket machinima som är en sammanslagning av de engelska orden ?machine? och ?animation? alltså maskin och animation.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

Discharge of untreated wastewater leads to unnaturally high levels of nitrogen and phosphorus in rivers, lakes and the sea, which results in unbalanced ecosystems with eutrophication and lack of oxygen. Part of the phosphorus in surface waters is coming from on-site wastewater treatment from scattered households with unsatisfactory purification. Blast furnace slag is a by-product from iron production, and has in laboratory trials showed good phosphorus binding capacity. To test blast furnace slag as a reactive filter media for phosphorus separation in a full scale experiment, a wastewater treatment plant has been built behind the picnic area at Ångersjön alongside the road E4 in central-eastern Sweden. The plant contains two parallel lines, one with blast furnaces slag and the other with Filtralite-P as phosphorus sorbent. Both filters have showed decreasing phosphorus purification effect with time in spite of a low wastewater load.

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

Swedish goats are mainly held for cheese production and therefore, both milk quality and composition are of great importance for dairymen. Today, only few data exists on milk composition from Swedish dairy goats and the casein content is still unknown. One way to reduce the work load for goat farmers and increase animal welfare can be to keep goats and kids together for longer periods. The aims of this study were to investigate how milk yield and composition were affected when kids suckled their dams during 8 weeks, and to measure the casein content on farm level by a mid-infrared spectroscopy method, previously calibrated for goat milk. Lactating goats were kept in two different MIX- systems where the dams are both suckled and milked.