The National Property Board (SFV) has been appointed by the Swedish government to administer all property of cultural value owned by the Swedes collectively. The commission includes maintaining the soul and character of each individual building, to adapt these buildings to present needs and requirements, and furthermore making them available to the public. The return on equity demanded by the government is based on the CAPM used within the real estate industry. The theoretical assumption that organizations are either function-driven or pay-driven will serve as a starting point, after which SFV will be defined as a function-driven organization with a pay-formed management control system. This paper aims to examine how applying a pay-formed management control system will affect a function-driven organization.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

This thesis investigates in which way principles and theories of usability is revelant when evaluating interactive systems for children aged 10-12. It also investigates whether there are specific factors that you should keep in mind while developing interactive products for the targeted group.The results of the qualitative study shows that priciples and theories of usability is relevant when evaluating interactive systems for the targeted group. However there is one concept that is more significant than the others. Our study shows that our targeted group is sensitive to time-consuming activities such as loading times etc. which has to do with the efficiency of the system.

The degree project was made forZetterbergs Industri AB. The company is market leading in Europe in the heavyvehicle industry, designing and building body systems for trucks.In their line of products is the hook lift called Livab, a flexible and uniqueproduct. The hook lift is often demanded by customers because its special ability tobe able to operate in situations with low roof clearance. The main operation principleof the hook lift can be described as a truck stand, laid down.There are two main versions of the hook lift Livab, AL 26 and AL 32. These are ofdifferent load capacity, 17 and 25 metric tons of gross weight respectively.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.