Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

The Swedish government has set up 16 environmental goals for Sweden to achieve. One ofthem is ?Living forests?, which is the foundation for the ?National strategy for the formalprotection of forests?. The ?National strategy? puts the private forest owner at the centre ofattention in order to achieve the environmental goal ?Living forests?.

Energy is an essential part of the society and for a sustainable future we need to use the energy resources in a sustainable way. The forest is Sweden?s most important resource for renewable energy and a higher production combined with shorter rotation periods (time from planting to clear cutting) can increase the access to energy. The tree genus poplar (Populus spp.) is interesting as energy resource as it has both high production and short rotation period. But browsing ungulates are a major threat to the establishment of poplar plants and therefore the poplar plantations need to be fenced in today. To use fences is expensive and time consuming; this makes it interesting to find more cost-effective solutions where there is no need to fence. The aim with this study was to look at the ungulates? occupation rate and browsing pressure in poplar plantations without fence.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

AbstractBackgroundEvery company has some kind of employee turnover and we can tell that som business has higher employee turnover than other business. Employee turnover is individual for all companies but in companies that is in the same business simularities can be seen. The employee turnover in the line of business hotel, merchandise trade and restaurants was according to Confederation of Swedish Enterprise closer to 40 % during the period of 2006-2007 and close to the business with highest turnover, the service sector. This is comparable to the buildning activity that with it?s 22 % is one of the business with lowest turnover.

By immersion in the situation of the food production today and a historical study of how past development has led us to this point, one goal of this essay is to discuss whether the current way of farming can be applied in a sustainable future. Another objective of the essay is to study the vision Vertical farming as an alternative approach, and to focus on different aspects of this phenomenon in order to provide as comprehensive a picture as possible.The paper, thus, seeks to broaden the views for alternative approaches regarding a well-established method which we often take for granted. The aim is also to initiate a discussion around the need to also take radical ideas in regard if we want to face the future in a sustainable manner. The method is a qualitative literary study where scientific articles and papers have been used to discuss the issues: why has the idea of Vertical farming arisen, what is Vertical farming and how is the Vertical Farm meant to operate? Does Vertical farming have a place in the sustainable city of the future? For a long time us humans lived as one with nature, in a symbiotic relationship in which we gave and took as a functioning part of an ecosystem.

Until recently the Danish government was hesitant about whether investments in climate and energy policies were the right strategy for Denmark. Today the Danish government argues that during the forthcoming climate conference in Copenhagen in 2009 (COP15), the world's countries must agree upon ambitious climate objectives. Denmark is together with EU-27 aiming at an ambitious climate agreement. This thesis intends to contribute with an understanding of why Denmark, both politically and economically, invests profound resources into committing the world's countries to a climate agreement. The study uses both a neoliberal institutionalism and a constructivist theory in analyzing the Danish engagement.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

BakgrundSvensk sjukvård har idag bland de bästa behandlingsresultaten i Europa, men trots det förs diskussionen om sjukvården ofta i negativa ordalag. I ett försök att förbättra synen på verksamheten och bli mer effektiva har sjukvården i Sverige ofta använt sig av kommersiellamodeller, modellerna har dock behövt anpassas för att fungera i sjukvårdens miljö. En av de senaste kommersiella modellerna som nu införs i den svenska sjukvården är Lean Healthcare,som är sjukvårdens version av Toyotas produktionsfilosofi Lean Production. En stor del avtidigare forskning på området har behandlat Lean Production men lite finns att tillgå som handlar om Lean Healthcare. Den här studien är ett bidrag till att utöka kunskapen om Lean Healthcare i Sverige.SyfteSyftet med den här studien är att beskriva hur Lean-filosofin fungerar i den svenska sjukvården samt att göra en jämförelse mellan Lean Production och andra kommersiella modeller som tidigare har införts i den svenska sjukvården.GenomförandeMed hjälp av intervjuer på tre svenska sjukvårdsenheter har en fallstudie med fokus på Lean Production och Lean Healthcare genomförts.ResultatResultatet av studien visar att Lean Healthcare, i likhet med tidigare modeller, har krävt anpassningar för att fungera i sjukvårdens kontext.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Nature is in many ways considered a source to both physical and mental health among people. Trends in today?s society reveal that children become more distanced to nature. Seen from the perspective of sustainable development this trend is considered crucial: it is of importance that children in their early ages experience nature positively in order to develop a dedication towards environmental issues as adults.The purpose of this study is to investigate how teachers use outdoor learning as an educational tool. Research data were collected through a series of interviews.

This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.