Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

This graduation paper is based on my interest for wood and its different tonal quality?s.After some time of thinking I decided to write my paper on the tonal difference between two of the most common woods in guitars, East Indian Rosewood and European Maple. I had built two identical guitars before my graduation paper in which the difference was the wood the back and sides were made of. One was being made of East Indian Rosewood and the other being made of European Maple.I chose to speak with a number of people with different angle of approach to the two kinds of wood and its tonal difference and quality?s.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

Tropical rain forests only cover around six percent of the world?s land area and contain around 70 % of the world´s animals and plants. Tropical rainforests have been, and still are, negatively affected by human activities. These activities lead to forest degradation which has negative impacts on production and biodiversity. Between 1970-1980 forests in Borneo, Sabah, Malaysia, was subjected to intense logging.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

The courts international juristiction within the European union is regulated by the Brussels I Regulation. Article 2.1 of the Brussels I Regulation contains the fundamental provision. According to this Article the plaintiff shall submit an action where the defandent is domiciled. The Regulation provides exemptions to the this provision in Article 2.1.The court of the international case can also be determined according to Article 5 (1) of the Brussels I Regulation. This Article contains an alternative to the general provision within Article 2.1.

The activities of beavers in forested landscapes affect both ecological and economical values. The creation of the dynamic wetland mosaic associated to beaver activities can even improve the quality of water and have been documented as an important landscape engineer affecting the environment for many species. The local office of Sveaskog in Skinnskatteberg is responsible for the management of large areas of the forests in the County of Västmanland. In this area one of several company?s goals are to create ten new wetlands in their own forests as a part of cooperation with the Swedish bird society and Swedish wetland association.

Printed and painted wallpaper on a weaved fabric backing was a common way to decorate homes in Sweden during the eighteenth and nineteenth centuries. Not much is written about the craftsmanship in relation to the hanging of these wallpapers and even less about the conservation of the objects. Even so, many wall segments remain in situ and in museums and are more often than not in dire need of conservation such as deacidification and consolidation. These are composite objects, consisting of cellulose materials with different properties along with adhesives and paints. Analysis of the materials is required to ensure safe handling and choice of conservation materials, and to establish a treatment plan which will be executed in several steps. This thesis aims to identify these steps and develop a method for conserving the wall segments with suitable materials, preferably without altering the source material to any significant degree.

Minskad efterfrågan på traditionella produkter från skogsindustrin kombinerat med ökad efterfrågan på icke-fossila material medför att företag inom skogsbranschen alltmer intresserar sig för nya produktsegment. Holmen New Business Development, en forsknings- och utvecklingsavdelning inom företaget Holmen arbetar med att utveckla produkter där trä kan ersätta traditionella alternativ. En möjlig produkt för avdelningen är Wood Plastic Composite (WPC), ett material som består av en kombination av en plastmatris och ett träbaserat fyllnadsmaterial som kan ges olika egenskaper vilka skiljer sig från rena trä- och plastmaterial. Syftet med denna studie var att undersöka hur designers och produktutvecklare inom olika svenska branscher ser på användandet och utvecklingen av WPC inom sina produktområden, både idag och i framtiden. För att undersöka detta har 18 kvalitativa intervjuer genomförts med företag inom möbel-, köks-, fönster-, dörr-, staket- och trallindustrin. Studien visar att ett lågt pris, hög beständighet mot till exempel röta, fukt och mögel samt att materialet går att bearbeta på samma sätt som trä är de mest önskvärda attributen hos framtida WPC-material. Miljövänlighet hos produkten är ett attribut som respondenterna tror kommer få större betydelse i framtiden men som kunderna inte är beredda att betala för idag.

The global biodiversity loss is mainly due to human activities such as an intensification of forestry. Boreal forest ecosystems in Fennoscandia are characterized by disturbances such as forest fires, storms and floods. However, industrial forestry practices suppress forest fires and change the landscape, leading to a loss of habitats and associated species. Particularly lichen species with slow adaptation abilities and a strong substrate specificity face an extinction debt in boreal forests since their substrates are long-lived but no longer created. In this study the species-substrate relationship of two red-listed forest-fire dependent lichen species Carbon-icola anthracophila and C.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Biodiversity is essential for human well-being and it is defined as the genetic variation within species and the variety of species and ecosystems. Biodiversity provides several ecosystem services which are necessary for human beings but there are different threats towards the biodiversity. The biodiversity linked to the forest in Sweden are threatened, about 50 % of the red-listed species in Sweden are associated with forests. This is linked to the commercial exploitation of the boreal forest in Sweden which started 200 years ago. The forestry the last 50 years, with clear-cuts, have contributed to a fragmented forest landscape.

Vida Skog is supplying the whole Vida Ltd?s mills with wood raw material. This study aims to evaluate Vida Skog?s contractors and the relatively new contractorportal and to identify measures that are important for the contractors? skills. The purpose with the portal is to facilitate co-operation between contractors and buyers by streamlining the logistics of the whole wood supply process.The study was conducted in the form of a questionnaire.Most of the respondents were positive to the portal.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

This study has investigated what makes a business relation satisfactory. The purpose is to distinguish the factors that are relevant to a functioning cooperation relationship between sawmills and DIY-stores. The theoretical framework is primarily based on long-term business relationships. The study is based on two case companies and their relations with wood-suppliers. - Case company 1 is a relatively new established and still growing company.