The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

The higher status homestead called Kullen is located on top of a small hill just outside of Hova in V?stra G?taland. The house stands on a plateau surrounded by a stonewall. Aerial photos from the 1960?s shows what looks like a big parklike garden behind the house, with a gravel walk cutting through on the length of the garden up to the house.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

Two field experiments were conducted in central Sweden in order to: 1) Determine a relationship between the number of approaching pine weevils (Hylobius sp.) and the number of attacks by pine weevils, in relation to the size of seedlings of Scots pine (Pinus sylvestris). 2) Determine if application of methyljasmonate (MJ) on seedlings of Scots pine will result in higher resistance towards attacks by pine weevils and/or have any effect on the number of approaching pine weevils. The field experiments were designed with two separate parts in close vicinity on the same clear cuttings: a) pitfall traps placed in patches of scarified soil that caught approaching pine weevils at 2.5 cm from the bait, which consisted of different sized seedlings of Scots pine some of which were subjected to application of MJ and b) the same type of seedlings planted out in patches of scarified soil. The first field experiment was conducted on a 1-year old clear cutting outside Uppsala in east central Sweden and the trapping part of the experiment consisted of 8 blocks with 6 treatments: 1) control, 2) small over-wintered seedling, 3) medium sized seedling, 4) medium sized seedling treated with 0.5 ml 100 mmol MJ 4 days prior to start of experiment, 5) large seedling, 6) vial with 9.5 ml of ?-pinene. The trapping experiment lasted for 6 weeks in the early summer.

The genus Campylobacter is globally recognised as the leading bacterial cause of human foodborne gastroenteritis. Every year around 8000 Swedes are infected by Campylobacter. Most people are infected by thermotolerant Campylobacter species, commonly C. jejuni and C. coli.

The fashion industry is a line of business which is characterised by tough competition. Often the consumer target groups exposed to advertisements identify them as attempts by the fashion industry to persuade them. When this happens, the consumer disregards the information due to selective attention. Faced with these conditions, companies need to find new, creative ways to market their product lines. This essay is about Public Relations, in particular Public Relations that appear in editorial spaces.

To be able to protect themselves from credit risk, the banks must constantly check the performance of  the companies they have lent money to. There are many mathematical models for predicting financial distress. These models use accounting-based ratios, which often are historical and not representative for the present situation. This study describes how the banks do in practice to find signals of insolvency in time and the variables they are observing for doing that.In addition to financial reports which the company sends in to the bank at least once a year, also the relationship between them and information from different information  agencies are of great importance to track  signals of insolvency. Poor profitability is the primary cause of insolvency.

One of the most serious and economically important defects caused by clostridia in milk products is the late blowing of semi-hard cheeses.Clostridia occur naturally in soil and can contaminate milk through crops contaminated by dung and soil followed by a less successful silage process, that give them opportunity to grow unaerobically. When anaerobic conditions occur, such as storage of semi-hard cheese, they ferment lactic acid to butyric acid and the gases CO2 and H2.At the fusion of Arla and MD Foods, a series of changes were conducted on the MPN method for lactic acid fermentation for clostridia in milk. These changes resulted in an increased accuracy due to an increased number of test tubes and the change of media from MRCM to BBB, Bryant & Burkey Broth, that was thought to be more selective for Cl. tyrobutyricum, the organism mostly found in hard cheese. When the number of dairy farmers that were given quality reduction fines increased, the new method was suspected and a validation was conducted.The validation included inoculation of different clostridia and bacillus strains into BBB substrate and enzymatic testing of positive samples with Rapid ID 32A.

This thesis has been performed at Clinical Chemistry at Sahlgrenska University Hospital in Gothenburg. The purpose of the project was to investigate new and alternative ways to determinate synthetic cannabinoids by gas chromatography-mass spectrometry. Currently, the possibilities to quantify synthetic cannabinoids are very limited. This can lead to an increased use of synthetic cannabinoids as the risk of detection is low, which may be known by drug users. The synthetic cannabinoids are sold mixed with different herbs and have varying names like Spice Gold, Spice Silver, K2, Smoke and Pot-pourri.The synthetic cannabinoids analyzed were JWH-018 and JWH-073, which are commonly found in seized Spice material.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

The problem of finding targeted medicine is a central problem in chemotherapy. From this point of view the ubiquitin-proteasome system is a highly promising object in the pharmaceutical approach. Proteasome plays a critical role in cellular protein degradation, cell cycle and apoptosis regulation.Proteasome inhibitors are substances blocking the actions of proteasome. Cancer cells are more sensitive to inhibition of the ubiquitin-proteasome system than normal cells. Therefore proteasome inhibitors have the potential to be successfully used in the cancer treatment.The study aimed to test various substances to identify possible proteasome inhibitors with the IncuCyteTM FLR image system and fluorometric microculture cytotoxicity assay.

The purpose of this study is to gain understanding of how self employed entrepreneurs (hereafter referred to as ?entrepreneurs?) develop their competence based on their perceived learning space. The main question is: How do these entrepreneurs develop their competence based on their perceived learning space? Other questions relevant for the study are: How important is the social environment for these entrepreneurs and how do they interact with their social environment in order to develop their competence. The study has a qualitative approach.

It is important to know what is normal in the wound healing process in order to determine what happens when a wound does not heal as expected. If the amount of bacteria in the wound gets too large the body will not be able to defend itself and it becomes an infection. Colonization and infection are common elements in wound management and it is often the veterinary nurse role to deal with wounds in a proper manner. Antibiotics are drugs that either kill or inhibit the multiplication of bacteria or fungi, and have been in veterinary medicine for approximately 60 years. Very few new antibiotics are introduced and increased resistance is a major problem that requires everyone to take responsibility to reduce the use of it.

The aim of this project was to change the way cutting techniques are being taught. I wished to try a method which I believed to enhance my students´ participation and understanding of their education. My purpose was to reduce the gap between theory and practice. After conducting a learning style test I found that most of them considered the best way for them to learn was by combining practice with dialogue and reflection of the tasks being done. That is why we tried to start working with the practical elements rather than traditionally starting with the theoretical aspects, while carefully intertwining terms and language of the trade into the education.